Descriptions
The Pepperl+Fuchs ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.
Features
- Miniature design
- Easy to use
- Very bright, highly visible light spot
- Full metal thread mounting
- Highly visible LEDs for Power ON and switching state
- Not sensitive to ambient light
Technical Data
| System components | |
| Emitter | M100-RT/76a/95 |
| Receiver | MV100-RT/95/103 |
| General specifications | |
| Effective detection range | 0 … 10 m |
| Threshold detection range | 15 m |
| Light source | LED |
| Light type | modulated visible red light |
| Diameter of the light spot | approx. 1 m at a distance of 15 m |
| Angle of divergence | approx. 2 ° |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2 |
| Functional safety related parameters | |
| MTTFd | 860 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0% |
| Indicators/operating means | |
| Operation indicator | LED green: power on |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted |
| Control elements | sensitivity adjustment |
| Control elements | Light-on/dark-on changeover switch |
| Electrical specifications | |
| Operating voltage | 10 … 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | Emitter: ? 15 mA |
| Receiver: ? 8 mA | |
| Input | |
| Test input | emitter deactivation at +UB |
| Output | |
| Switching type | The switching type of the sensor is adjustable. The default setting is: light on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Voltage drop | ? 1.5 V DC |
| Switching frequency | 1000 Hz |
| Response time | 0.5 ms |
| Conformity | |
| Product standard | EN 60947-5-2 |
| Approvals and certificates | |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ?36 V |
| Ambient conditions | |
| Ambient temperature | -30 … 60 °C (-22 … 140 °F) |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Mechanical specifications | |
| Housing width | 11 mm |
| Housing height | 31 mm |
| Housing depth | 20 mm |
| Degree of protection | IP67 |
| Connection | M8 x 1 connector, 4-pin |
| Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | approx. 20 g (emitter and receiver) |
| Tightening torque, fastening screws | 0.6 Nm |
Download Datasheet: Pepperl+Fuchs M100/MV100-RT/76a/95/103 Thru-beam sensor
Reference: pepperl-fuchs.com
Another Article:
- Pepperl+Fuchs M100/MV100-RT/35/76a/95/103 Thru-beam sensor
- Pepperl+Fuchs LA39/LK39/31/40a/116 Thru-beam sensor
- Pepperl+Fuchs LA31/LK31/25/31/115 SET Thru-beam sensor
- Danfoss DST P92S Pressure Transmitter for SIL-2 Applications
- Danfoss MBS 1900 Pressure Transmitter for Air and Water Applications