The R103 Pepperl+Fuchs series miniature optical sensors are the first devices of their kind to offer an end-to-end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks.
The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.
Features
- Miniature design with versatile mounting options
- IO-link interface for service and process data
- Various frequencies for avoiding mutual interference (cross-talk immunity)
- Extended temperature range
-40°C … 60°C - High degree of protection IP69K
Technical Data
System components | ||
Emitter | OBE10M-R103-S-IO-V31 | |
Receiver | OBE10M-R103-2EP-IO-V31 | |
General specifications | ||
Effective detection range | 0 … 10 m | |
Threshold detection range | 12.5 m | |
Light source | LED | |
Light type | modulated visible red light | |
LED risk group labelling | exempt group | |
Diameter of the light spot | approx. 65 mm at a distance of 1 m | |
Angle of divergence | 3.7 ° | |
Functional safety related parameters | ||
MTTFd | 462 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0% | |
Indicators/operating means | ||
Function indicator | Yellow LED: | |
Permanently lit – light path clear | ||
Permanently off – object detected | ||
Flashing (4Â Hz) – insufficient operating reserve | ||
Control elements | Receiver: light/dark switch | |
Electrical specifications | ||
Operating voltage | 10 … 30 V DC | |
Interface | ||
Interface type | IO-Link ( via C/Q = pin 4 ) | |
IO-Link Revision | 01.01 | |
Min. cycle time | 2.3 ms | |
Process data width | Emitter: | |
Process data output: 2 Bit | ||
Receiver: | ||
Process data input: 2 Bit | ||
Process data output: 2 Bit | ||
Compatible master port type | A | |
Output | ||
Switching type | The switching type of the sensor is adjustable. The default setting is: | |
C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link | ||
/Q – Pin2: NPN normally closed / light-on, PNP normally open / dark-on | ||
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected | |
Usage category | DC-12 and DC-13 | |
Compliance with standards and directives | ||
Directive conformity | EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 |
Standard conformity | Product standard | EN 60947-5-2:2007+A1:2012 |
IEC 60947-5-2:2007 + A1:2012 | ||
Mechanical specifications | ||
Housing width | 15 mm | |
Housing height | 43.9 mm | |
Housing depth | 26.7 mm | |
Degree of protection | IP67 / IP69 / IP69K | |
Connection | M8 x 1 connector, 4-pin | |
Material | Housing | PC (Polycarbonate) |
Optical face | PMMA |
Download Datasheet: Pepperl+Fuchs OBE10M-R103-S2EP-IO-V31 Thru-beam sensor
Reference: pepperl-fuchs.com
Another Article:
- Pepperl+Fuchs M100/MV100-RT/35/76a/95/103 Thru-beam sensor
- Pepperl+Fuchs Thru-Beam Sensors
- Pepperl+Fuchs LA39/LK39/31/40a/116 Thru-beam sensor
- Pepperl+Fuchs LA29/LK29-Z-F1/31/116-SET Thru-beam sensor
- Danfos CS Pressure Switches for Air and Water