The Hengesbach KS050D pressure transmitters is suitable for measuring the pressure and filling level in tanks and pipes. Its capacitative measurement cell and ceramic membrane makes the KS050D the ideal candidate for use in applications with abrasive media. KERAMESS pressure transmitters are designed for a measuring range of -1/0…1bar to -1/0…70bar. Special measuring ranges are also available.
The Hengesbach 050D series pressure transmitters are equipped with a micro-processor controlled electronics system and an accuracy of ≤ ± 0.2% FS. They are parametrised with a simple and user-friendly operating concept via 2 keys and a multi-colour status LED.
A Turn Down of up to 4 can be set using the full and empty adjustment. The large range of hygienic process connections such as e.g. the VARIVENT®, clamp DIN 32676, conical coupling with DIN 11851 groove union nut etc. guarantee the Hengesbach KS050D a variety of applications in the food industry and all other hygienic applications. A wide variety of process connections are also available for non-hygiene applications.
Their use in hygienic applications are assisted by the robust stainless steel field housing in the IP 67 and IP 69K, which withstands extremely aggressive cleaning techniques. The Hengesbach 050D pressure transmitters are highly-suited to use in applications which strict hygiene standards and basic requirements of functionality and accuracy
Features: Hengesbach 050D
- mechanically robust, dry ceramic measuring cell, suitable for viscous and abrassive media
- output signal 4…20mA, turndown 4
- accuracy ≤ ± 0,2% FS
- simple calibration, even without disconnection of the transmitter, through switchable power supply plant / calibrator supply
- simple parametering via 2-key concept and multi-colour status-LED
- with hygienic and standard process connections as a fixed connection
- for measurement of pressure and filling level in tanks and pipes with basic requirements
|
Another Article: |
Specification:
| General details | ||||||||||
| Device type/measuring principle | KS050D: capacitive | |||||||||
| Input | ||||||||||
| Measuring ranges | KS050D | |||||||||
| Standard nominal measuring range [bar] | Relative | OP | Relative | OP | Absolute | OP | ||||
| 00.05 | 4 | 40 | 60 | ### | 4 | |||||
| 00.01 | 4 | 70 | 105 | ### | 6 | |||||
| OP = overload protection [bar] | ±0.1 | 4 | -1 to 1 | 10 | ### | 6 | ||||
| 00.02 | 6 | -1 to 2 | 18 | 1 | 10 | |||||
| Special measuring ranges are available on request. | 00.04 | 6 | -1 to 4 | 25 | 2 | 18 | ||||
| 1 | 10 | -1 to 10 | 40 | 4 | 25 | |||||
| All measurement cells are vacuum safe | 2 | 18 | -1 to 20 | 40 | 10 | 40 | ||||
| 4 | 25 | -1 to 40 | 60 | 20 | 40 | |||||
| 10 | 40 | -1 to 70 | 105 | 40 | 60 | |||||
| 20 | 40 | 70 | 105 | |||||||
| Setting the measuring ranges | via the 2 keys within the transmitter | |||||||||
| Setting ranges | Measuring range begin zero: | 0 to 75% | of the sensor’s nominal measuring span | TD=4 | ||||||
| Measuring span | span: | 25 to 100% | of the sensor’s nominal measuring span | |||||||
| Burst pressure DIN16086 | >= 4-fold nominal measuring range | |||||||||
| Output | ||||||||||
| Output signal | 2-wire: 4 to 20mA with a test circuit connection in the device | |||||||||
| Fault signal | 22mA | |||||||||
| Current limitation | 3.8mA and 21mA (normal operation, cannot be set) | |||||||||
| Measuring accuracy | ||||||||||
| Reference conditions | acc. to DIN IEC 770 | |||||||||
| Linearity, hysteresis and repeatability acc. to the limit point method DIN IEC 770 | ≤ ± 0.2% of the sensor nominal measuring range | |||||||||
| Activation time | < 2 s (The device will perform a self-test.) | |||||||||
| Setting time | < 1s | |||||||||
| Long-time drift | ≤ 0.2% of the span per year | |||||||||
| Thermal hysteresis | ≤ | 0.2% of the sensor’s nominal measuring range / 10K (-20 to +80°C) from 4 bar | ||||||||
| ≤ | 0.3% of the sensor’s nominal measuring range / 10K (-20 to +80°C) up to 0.6 bar | |||||||||
| Conditions of use | ||||||||||
| Installation position / calibration position | Any position / standing vertically | |||||||||
| Medium temperature | -40 °C to +125 °C (140 °C for max. an hour) | |||||||||
| Ambient storage temperature | -40…+85°C (below -20 °C danger of cable breakage) | |||||||||
| Protection class acc. to EN60529 | IP 67 and IP 69K | |||||||||
| Electromagnetic compatibility | acc.to EN 61326-1 | |||||||||
| Construction | ||||||||||
| Electrical connection | – Standard: M16x1.5 cable screw connection, nickel-plated brass (stainless steel available on request) | |||||||||
| – Optional: M12x1 round plug-in connector, nickel-plated brass (stainless steel available on request) | ||||||||||
| – Optional: angle plug acc. to EN 175301-803 | ||||||||||
| – Optional: reference cable | ||||||||||
| Process connection | – All standard flush-mounted process connections and those commonly used by the manufacturer | |||||||||
| Construction | ||||||||||
| Materials | – Field housing / lid: | CrNiSt 1.4301 (304) | ||||||||
| – Electronics cast: | Silgel | |||||||||
| – Housing seal: | FPM (Viton®) | |||||||||
| – Pressure compensation element: | Polyamide | |||||||||
| – Process connection / connection adapter: | CrNiSt 1.4404 (304) | |||||||||
| – Process membrane: | Al2O3 (99%) | |||||||||
| – Reference cable, 5-wire with reference tube: | PUR (recommended: 80 m maximum) | |||||||||
| Display and operation | ||||||||||
| Display | Multiple-colour status LED | |||||||||
| Operation | 2-key concept | |||||||||
| Auxiliary energy resources | ||||||||||
| Power supply / burden | 12…30V DC, max. burden: (Vsupply – 12V) / 22mA | |||||||||
Download Data Sheet: Pressure and Level Transmitter Keramess KS 050D Series
Other Articles :
- Hengesbach Pressure and Level Transmitter PZM Series 050D
- Hengesbach PZM/VRM 200/201 Pressure and Level Transmitter
- Flush-Mounted Pressure Transmitter VRM050D Series Hengesbach
- Flush-Mounted Pressure Transmitter TCF050D Hengesbach
- Pressure and Level Transmitter Keramess KS 050D Series Hengesbach
- Hengesbach TE 32 Digital Temperature Transmitter
Ref: Hengesbach.com
You must be logged in to post a comment.