Bamo XMLA Pressure Switches

Bamo XMLA Pressure Switches allows the triggering of a high alarm or a low alarm. The contact is adjusted using a screwdriver or an Allen key and an indication window for reaching the adjustment.

Bamo XMLA Pressure Switches Features

Range: 0.4 … 35 bar
Resistant to vibrations and shocks

Application

Local pressure monitoring without reading, with alarm contacts
Control of fluids: Air, Softened water, Hydraulic oil

Bamo XMLA Pressure Switches Specification

Pressure switch type	Electro mechanical pressure detector
Fluids compatibility	Air – Softened water – Hydraulic oil
Fluid temperature	0… 70 °C
Hydraulic connection	BSPF ¼” Female thread (ISO 228)
Electrical connections	Screw terminals, 1×0.5 … 2×2.5 mm²
Connections	ISO n°1 (13; 14; 11; 12) OF
Cable	AWG 20 to AWG 14
Cable entry	For cable gland 9 … 13 mm
Contacts	Silver Contacts
Contacts	1 N.O. & 1 N.C. contacts
Switch type	Single threshold detection
Outputs	Remote control
Hysteresis	Fixed hysteresis
Display	Local indicator
Pressure actuator	Diaphragm
Wet parts materials	FPM, Zinc alloy (XMLA 004A / 010A)
Wet parts materials	Brass, Nitrile, Zinc alloy (XMLA 020A / 035A)
Housing material	Zinc alloy
Sealing	IP 66
Electrical protection	Class 1
Short circuit protection	10 A fuse cartridge
Overriding resistance [Uimp]	Rated voltage: 6 kV
Auxiliary contacts	Snap action maneuver
Resistance to vibrations	4 gn (f = 30 … 500 Hz)
Resistance to mechanical shock	50 gn
Lifetime	5,000,000 cycles
Mounting positions	All positions
Operating temperature	-25 … +70 °C
Storage temperature	-40 … +70 °C
Mass	685 g (XMLA 004A / 020A)
Mass	695 g (XMLA 020A / 035A)
Agreements	BV
	CCC
	CSA
	LROS (LIoyds register of shipping)
	UL
	EAC