Eska ERG-E Series Gas Pressure Regulator with Shut-Off Valve

Description

Eska ERG-E Series Single Stage Gas Pressure Regulator with Shut-Off is used in the gas lines in order to reduce the maximum 1 bar input pressure to the desired output pressure between 16 and 150 mbar. The range of the output pressure can be set with the choice of a different spring.

The regulator with safety Shut-Off gets automatically active and stops the gas flow in case output pressure gets higher or lower than the adjusted value in order to ensure the safety of the devices used in the system. The relief valve system is also available. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.

Eska ERG-E Series Features

  • Used in the gas lines in order to reduce maximum 1 bar input pressure
  • Output pressure between 16 and 150 mbar
  • Regulators are manufactured according to Ped Directive 2014/68/EU
  • Functional tests are performed according to EN334

Specification

UsageCity gas networks and gas pipelines in industrial areas
MediumNon?corrosive gases such as Natural Gas (Methane), LPG, Town Gas, Air, etc
Pressure ClassPN1
Connection or Port Size1/2”, 3/4”, 1”, 11/4”, 11/2”, 2” Threaded (Female)
Inlet Pressure Range50 mbar up to 1 bar
Outlet Pressure Range16 mbar up to 150 mbar
FilterOptional
Number of StagesSingle Stage
Accuracy ClassAC 10 (± 10%) (On Request AC5, AC15, AC20)
Lock Up Pressure ClassSG30 (+ 30%) (On Request SG10, SG20))
Ambient Temperature?20°C up to 60°C (On request -40 °C)
OPSO Pressure Range30 mbar up to 200 mbar
OPSO Pressure Tolerance20%
UPSO Pressure Range12 mbar up to 40 mbar
UPSO Pressure Tolerance20%
Shut Off TimeLess than 1 second
Structural Additional FeaturesWith Shutoff
Material StandardAluminum-EN 1706 / Brass-EN 12164 and EN 12165 / Rubber-EN 549
According to Directives2014/68/EU

Download Data Sheet: ERG-E Single Stage Gas Pressure Regulator with Shut-Off

Ref: en.eskavalve.com

Other Article:

Similar Posts