Wenglor L1FL66VD Retro Reflex Sensor UniversalIndonesia Industrial Parts

Wenglor L1FL66VD Retro Reflex Sensor Universal is a reflector that must be used in combination with these sensors. They can be installed in all kinds of industrial environments thanks to ample functional reserve. Even reflective objects can be reliably recognized through the use of polarized light. Reflex light barriers and retro-reflex sensors work with different light sources, whereby the emitter and receiver are located in one housing. When the light beam between the emitter and the defined background or reflector is interrupted, a switching signal is output.

Features at a Glance

Rear panel mounting
Glossy objects can be detected
Integrated output

Electrical Data

Supply Voltage 10 … 30 V DC
Current Consumption (Ub = 24 V) < 30 mA
Switching Frequency 2 kHz
Response Time 250 µs
Temperature Drift < 10 %
Temperature Range -10 … 60 °C
Switching Output Voltage Drop < 2.5 V
PNP Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III

Applications

Dimensions specified in mm (1 mm = 0.03937?)

1 = Receiver Diode

2 = Transmitter DiodeScrew

M2 = 0,3 Nm

Specifications

Optical Data
Range	1,400 mm
Reference Reflector/Reflector Foil	RQ100BA
Switching Hysteresis	< 15 %
Light Source	Red Light
Polarization Filter	yes
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Opening Angle	15 °
Two-Lens Optic	yes