Description Siko SG30 Draw-Wire Encoder is a very robust wire-actuated encoder in a compact design for numerous applications including crane construction, stage construction, warehousing technology, etc., with a measuring length of up to 3000 mm. Easy, universally changeable installation. Length measurement technology with Siko SG30 Draw-Wire Encoder SIKO wire-actuated encoders have been in use for many years in the […]
Description Siko SG31 Draw-Wire Encoder is a very robust wire-actuated encoder in a compact design for numerous applications including crane construction, stage construction, warehousing technology, etc., with a measuring length of up to 3000 mm. Easy, universally changeable installation. In combination with a safety encoder from the PURE.MOBILE sensor platform, the wire-actuated encoder can also […]
Description Siko WH5800M Absolute Encoder is a magnetic absolute rotary encoder with a hollow shaft, which has been specially developed for use in mobile machines. Thanks to its particularly robust design and optionally a CANopen or SAE J1939 interface, it is ideally suited for tough conditions in mobile machines. With the help of PURE.MOBILE extension […]
Description Siko WV5850 Absolute Encoder absolute rotary encoder with solid shaft and industrial Ethernet. The absolute optical multiturn rotary encoder WH5850 is particularly high-resolution and designed for time-critical applications. Thanks to the large selection of Industrial Ethernet interfaces, such as PROFINET (also with PROFIdrive profile), EtherNet/IP as well as short reaction times and 100% magnetic […]
Description Siko AH25S Absolute Encoder robust absolute single-turn rotary encoder. The rotary encoder Siko AH25S is a magnetic miniature single-turn absolute encoder with an analog output. This rotary encoder with its robust die-cast housing was designed especially for use in mobile machines and has an absolute range of 360°. With its extremely compact size (ø25 […]
Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when […]