Description The RHM 80 excels in tough applications where high temperatures, pressures, and corrosive fluids are present. Its heavy-duty construction withstands extreme applications without losing Coriolis meter performance. Range: 80 kg/min up to 8000 kg/min Pressure: up to 299 bar (4336 psi) Temperature: -196°C (-321°F) up to +350°C (662°F) Accuracy: 0.1 % of rate Materials: […]
The Measurement Principle Each mass flow meter has two measuring tubes. The oscillating system is driven by two controlled electromagnetic excitation coils. As liquids or gases flow through the oscillating omega tubes, the Coriolis force is created and causes a slight deflection of the two measuring tubes from their original shape. The opposing tubes are […]
Rheonik RHM04 Coriolis Mass Flow Meter is a fast response solution for batching, dispensing, and filling applications. Very high-pressure ratings allow deployment in processes where Coriolis meter use has not been possible in the past. Range: 0.05 kg/min up to 18 kg/min Pressure: up to 1401 bar (20319 psi) Temperature: -196°C (-321°F) up to +210°C […]
Rheonik RHM03 Coriolis Mass Flow Meter is available with a wide selection of wetted materials and the highest pressure and temperature ratings in the market. It is suitable for all low-flow applications where high accuracy is a must. Range: 0.03 kg/min up to 7.5 kg/min Pressure: up to 1311 bar (19014 psi) Temperature: -196°C (-321°F) […]
Mass Flow Meter operating on the “Coriolis principle” contains a vibrating tube in which a fluid flow causes changes in frequency, phase shift or amplitude. The sensor signal is fed into the integrally mounted pc-board. The resulting output signal is strictly proportional to the real mass flow rate, whereas thermal mass flow meters are dependent […]