Burkert Type 6027 Direct-acting 2/2 Way Plunger Valve is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy.
An optional sliding ring bearing increases the service life with dry gases. Special seal technology is used for high-pressure applications. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X. This product can be combined with Cable Plug Type 2518 and Type 2513.
Features
- Direct-acting, powerful valve with diameter of up to DN13
- Vibration-proof, bolted coil system
- Increased leak-tightness with welded plunger guide tube
- Explosion proof versions
- High pressure variants for gases and liquids
Specifications
Product properties
| Dimensions | Detailed information can be found in chapter “4. Dimensions” on page 8 of datasheet. |
| Materials | |
| Body | Brass or stainless steel 1.4404 Coil |
| Coil | Epoxy |
| Orifice | DN1.0…DN13.0 |
| Coil insulation class | Epoxy classe H |
Performance data
| Duty cycle / single valve | 100% continuous rating |
| Response times | |
| Response times AC | Opening: 10…30 ms |
| Closing: 50…80 ms | |
| Response times DC | Opening: 20…30 ms |
| Closing: 50…80 ms | |
| Circuit function | A and B |
Electrical data
| Voltage tolerance | ±10% |
| Voltages | 24V/DC, 24V/50Hz, 230V/50Hz, others on request |
Medium data
| Medium | Vacuum, neutral gases and liquids (e.g. compressed air, town gas, natural gas, water, hydraulic oil, petrol) and slightly aggressive medium, Hot liquids and steam Oil burner version PF15: Heating oil (EL, L, M, S) acc. to DIN 51603 part 1…6, shipping fuels acc. to ISO 8217, fatty acid methyl ester (FAME) acc. to DIN EN 14213, rapeseed oil acc. to DIN V 51605 |
| Viscosity (max.) | 21 mm2 /sec |
| 1.6…76 cSt (DN2, 2 NC 1.6…22 cSt) (Oil burner version PF15) | |
| Medium temperature | Seat seal/external seal |
| Standard version | FKM/FKM: -10 °C…+140 °C |
| EPDM/EPDM: -30 °C…+120 °C | |
| NBR/NBR: -10 °C…+80 °C | |
| PTFE/FKM: -10 °C…+140 °C | |
| PTFE/PEEK: -40 °C..+180 °C | |
| High pressure version MX31 & MX32 | PEEK/FKM: -10 °C…+80 °C |
| PEEK/EPDM: -30 °C…+80 °C | |
| PEEK/PEEK: -40 °C..+80 °C | |
| Approval DIN EN 161 (PO19) | NBR/NBR: 0 °C…+80 °C |
| FKM/FKM: 0 °C…+80 °C | |
| Oil burner version PF15 | 0 °C…160 °C |
Approvals and Certificates
| Protection class | IP65 with cable plug |
| DIN Certco registration (Oil burner version PF15) | DN2.2 (NO) Reg. No.: 5S255 |
| DN3.0 (NC) Reg. No.: 5S255 | |
| DN3.5 (NC) Reg. No.: 5S255 | |
| DN10.0 (NC) Reg. No.: 5S255 |
Product connections
| Port connection | G ¼, G ⅜, G ½, G ⅜ (NPT and RC on request) |
| G ¼, G ⅜, G ½, G ⅛ (Oil burner version PF15) | |
| Electrical connection | acc. to DIN EN 175 301-803 Form A for cable plug Type 2508 (see “Cable plug Type 2518, form A acc. to DIN EN 175301 – 803” on page 22 of datasheet) |
Environment and installation
| Installation | As required, preferably with actuator upright |
| Ambient temperature (max.) | 55 °C |
| -15 °C…+60 °C (Oil burner version PF15) |
Power Consumption
| Orifice [mm] | AC | DC | ATEX/IECEx AC/DC | KD coil AC/DC1.) | |||||
| Inrush power | Holding power | Cold performance | Warm performance | ||||||
| [VA] | [VA] | [W] | Cold performance [W] | Warm performance [W] | Rated power [W] | Inrush power | Holding power [W] | Holding power [W] | |
| [W] 500 ms | |||||||||
| 42 (K) | 150 | 37 | 16 | 21 | 16 | 12 | 85 | 08.05 | 7 |
| 65 (L) | – | – | – | 28 | 21 | 20 | – | – | – |
Download Datasheet: Burkert Type 6027 Direct-acting 2/2 Way Plunger Valve
Other Articles :
- Burkert General Purpose 2/2 Solenoid Valves
- Burkert Type 6281 Servo-assisted 2/2 Way Diaphragm Valve
- Burkert Type 5282 Servo-assisted 2/2-way Diaphragm Valve
- Burkert Type 6407 Servo-assisted 2/2-way Piston Valve
- Burkert Type 6724 2/2 or 3/2-way Whisper Valve