Flocorp LTRP-1 Ranger One Ultrasonic Level Transmitter has a maximum range of 14 feet (4.3 meters). Like all Ranger sensors, it’s built for durability and ease of use in tough industrial environments. The Ranger One™ is unique in the Ranger family of products because it can be applied to any liquid tank level application and much more.
The Ranger One™ is an ideal solution for position or distance measurement in factory automation like web control or heavy equipment monitoring, as well as solids, level remote monitoring on anything from corn flakes to sawdust. It’s fully submersible, corrosion-resistant, shock resistant ultrasonic sensors are housed in 316 stainless steel and all-around tough.
The Ranger One™ sensors contain a rugged transducer potted in stainless steel housing for long life. Outputs respond to measured distance and non-contact technology means nothing touches your materials. It’s also fully configurable with our software.
Ranger One includes our famous “Teach” feature for push-button configuration. You can quickly adjust, optimize, save, and clone your applications without calibration. The Ranger One™ has Multi-Sensor network capabilities using Smart Communications via Modbus protocol, RS-485. The Ranger One™ would typically replace conventional ultrasonic level sensors PLUS proximity sensors and proximity switches.
Flocorp LTRP-1 Ranger One Features and Benefits
- Long-range, short dead band
- Unaffected by optical factors like color and transparency
- PC or button “teachable” setup
- Narrow beam adjustments to optimize performance
- Temperature-compensated
- Quick mounting
- 1.18 inch (30 millimeters) type 316 stainless steel housing
- Sealed epoxy potting for wet and dirty applications
- A ruggedized piezoelectric ultrasonic transducer, potted in place
Flocorp LTRP-1 Ranger One Specifications
| Maximum Range | 14 feet (4.3 meters) |
| Optimum Range | 4 inches – 10 feet (102 millimeters – 3 meters) |
| Process Connection | 30 x 1.5mm Thread |
| Accuracy | Better than 0.5% of target distance in stable, homogeneous air environment; affected by temperature gradients, target echo strength, speed of sound in vapors. |
| Power Input | 10 – 30 VDC @ 60 mA maximum; typical |
| 45 mA @ 24 VDC | |
| Temperature | -40° to 158° F (-40° to 70° C) |
| Humidity | 0 to 100% operating |
| Compensation | Temperature Compensation |
| Adjustment | Button “teach” or software |
| Configuration | Stored in non-volatile memory |
| Outputs | Two selectable, plus serial data |
| Current / Volt Output or Switched Outputs | Out puts on the black and white wires are software selected. The black wire options are 4-20mA current loop or switch. White wire options are 0-10 VDC or switch. Switches can be sourcing or sinking. Max current loop resistance is derated below 15 VDC input voltage. |
| Protection | NEMA-4X, NEMA-6P, IP68 |
| Transducer | Ruggedized piezoelectric |
| Resolution | Digital: 0.0034 inches (0.086 millimeters); Analog:4099 steps (0-10 VDC), 3279 steps (4-20 mA) |
| Repeatability | Greater of +/-0.03 in. (0.76 mm) or Nominal 0.2% of range @ constant temp. Affected by target, distance, environment |
| Update Rate | 20 Hz (50 ms), Software adjustable; also affected by Software filter selections |
| Output Selection | Voltage Voltage & 4-20 mA current loop (defaults), switches, or a combination |
| Voltage Output | 0-10, 0-5 VDC or PC customized, 10 mA max; also push-button teachable endpoints |
| Current Loop | 4-20 mA or PC customized, current sourcing, max. loop 450!, teachable endpoints |
| Sinking Switch | 150 mA max. @ 40 VDC max., teachable set point & polarity, fault indication |
| Sourcing Switch | 150 mA max. @ input voltage, teachable set point & polarity, fault indication |
| RS-232, RS-485 | Modbus protocol, 9600 to 115200 baud, |
| 8 data bits, 1 stop, no parity | |
| SYNC Feature | Permits up to 32 sensors to operate in |
| close proximity without interaction | |
| Target Requirements | |
| Objects | Detects flat or curved objects. Surface must reflect ultrasound to sensor |
| Max. Distance | Affected by size, shape, orientation of target (sound level reflected back to sensor), environment. Restrict use to Optimum Range when using over a wide range of environmental conditions |
| Orientation | Flat surfaces should be oriented |
| perpendicular to sensor output beam | |
| Optical | Unaffected by target color, light, transparency or other optical characteristics |
| Specifications are subject to change without notice. | |
Download Datasheet: Ranger One™ LTRP-1 Ultrasonic Level Transmitter (up to 14ft), FLocorp-Level Transmitter
Ref: Flo-corp.com
Other Article:
- McCROMETER FPI Mag Electromagnetic Flow Meter
- Signet 2551 Magmeter Flow Sensor
- Litre Meter Electromagnetic Flowmeter Range and Ultrasonic Flowmeter
- Signet 2580 FlowtraMag® Meter
- Signet 2552 Metal Magmeter Flow Sensor