Description Compact on-site display with carrier frequency or inductive sensor for the evaluation of volume flows. A temperature sensor integrated into the sensor tip is available in the VTC version, thereby making it possible to measure the medium temperature. All measurement results and parameters relevant for the process can be shown directly on the VTC/VIC […]
Description AW-Lake HM-F Flange Turbine Flow Meter can handle low viscosity fluids flowing under extremely high pressure. They are best suited for use with hydraulic oil, fuel and other light oils when ANSI or tri-clamp flanges are required. The turbine wheel’s low moment of inertia allows a fast acceleration from standstill up to full number […]
Delta Mobrey Hydrastep 2468 System failure to detect low water levels in the steam-raising plants can have costly and potentially disastrous consequences. Reliable water level detection is vital to prevent damage to plants and personnel. The Hydrastep electronic gauging system is the ideal ‘fit and forgets’ solution to overcome the problems associated with unreliable and […]
Description AW-Lake Flow Rate Transmitter is ideal for batching, industrial process control, mobile hydraulic equipment and computer / PLC controlled hydraulic system monitoring applications. It is designed without delicate internal components to break, abrade, or corrode. The weather-tight construction includes a rugged cast aluminum enclosure built to NEMA 4X standard for installation outdoors. This variable […]
Description Delta Mobrey DPR-2200 Differential Pressure Transmitter comes fitted with two diaphragm seals and is suitable for measuring pressures from -100mbar to 70bar with maximum working pressures up to 420bar. The DPR-2200 SMART Differential Pressure Transmitters are suitable for measuring differential pressure of gases, vapors, and liquids. The active sensing element is a piezoresistive silicon […]
WT.02/WI.02 The local converters type WT.02/WI.02 are passive 4 – 20 mA sensors with carrier-frequency-input stage (WT.02) or inductive input stage (WI.02). The carrier frequency converters WT.02 are recommended for low flow due to the lower cut off frequency (typically < 0.5 Hz). The inductive converters WI.02 are recommended for higher medium temperatures up to […]