BASI Instrument AB – Process Instrumentation is designed to give you an overview of the ability of BASI to meet the instrumentation and sensor needs of most process control applications.
About BASI Instrument AB
We have been delivering intelligent, flexible, and rugged instrumentation since 1981. By paying close attention to quality BASI has built up an enviable reputation together with a proven track record. Our instrumentation and associated sensors can be found in many industrial fields and locations all over the world.
The BASI products are based on state-of-the-art electronics with ease of use and flexibility in mind. Our product range has grown significantly to meet the requirements of our industrial and laboratory users. BASI Instrument AB and our sister company, Autonics Scandinavia AB is a Steen Technology AB group of companies.
Our own registered trademarks is BASI, AUTONICS Our office is located close to the city of Malmö in the southest part of Sweden and also close to Copenhagen, Denmark. We want to be your partner, serving you with process instrumentation and sensors of the highest quality at very competitive prices.
The Products of BASI Instrument AB
Electromagnetic Flowmeter BFM980
Inductive flow meter BFM980 with HART is a device designed for measuring, indicating, and storing flow and passed-through volume data of conductive liquids. Flow meter BFM980 records both positive and negative flow.
As there are neither moving nor mechanical parts in the flow profile the device can be applied to measure extremely polluted liquids containing even solid pollution. The only limitation is that the device can be used solely with conductive liquids. Range of applications. Inductive flow meter BFM980 is designed to be used in the chemical industry, paper industry, waterworks maintenance, waste-water maintenance, etc.
Features: Inductive flow meter BFM980 is a highly accurate and stable device. The construction of the BFM980 indicator uses components with long-term time and temperature stability. Configuration data is backed up and can be recovered after a power failure. The backup structure enables data recovery in case of a partial loss of data (as a result of e.g. high-level electrostatic discharge or high noise of power supply). Internal CPU provides all functions usually built-in electronic flow meters, including. Liquid temperature measuring, low flow rate correction, frequency response setting, bandwidth of sensitivity setting at low flow rates, etc.
Inputs / Outputs. Flow meter BF980 is equipped with isolated outputs as standard. Digital outputs (frequency, pulse, and relays) is user configurable. Current output 4-20 mA can be used as a passive or active type. For communication are available HART protocol or RS232 and RS485 outputs with the Modbus protocol.
Ultrasonic Flow Meter BFM660
The BUFM660 series is a remote version of ultrasonic open channel flow meters (O.C.M.). It consists of two elements, a wall-mounted host, which has a display and an integral keypad for programming, and a probe, which must be mounted directly above the surface to be monitored.
Both of the host and the probe are plastic leak-proof structure. The BUFM660 series OCM can be widely applied to environmental protection, water treatment, irrigation, chemical, and other industries. Features BUFM660 series O.C.M. is capable of the following functions: High detection accuracy, the flow meter measurement changes with 1mm, the accuracy of change in level is 1 mm; Suitable for a variety of weirs and flumes, Parshall flumes (ISO), Right-angle triangle weir, Rectangular weir; Displays flow rate in L/S or M3
- Excellent anti-interference capability;
- Clear display with enhanced 14 digit two-line backlit LCD;
- The cable length between the probe and host is up to 1000m;
- The probe with leak-proof structure and IP68 protect grade;
- Chemically resistant probe materials for maximum application flexibility;
- Provided 4-20mA output and RS485 serial communication MODBUS
- Provided programmable 6 relays at most for alarms;
- Three-button for programming or remote control
Float Level Transmitter BLT100
BLT100 level transmitter is a float level transmitter. The operating principle is based on a consecutive switching of the cascaded reed switches by the special magnetic float, moving alongside a protective tube.
The reed switches act on the elements of a resistor matrix, changing the total matrix resistance in linear proportionality with the measuring level. The BLT100 provides a 2-wire 4 to 20 mA. output signal with 6 or 12mm level resolution. An integrated loop-powered programmable LCD indicator is also available.
Ultra Sonic Level Transmitter BULT200
The BASI BULT200 Series is a liquid-level transmitter based on ultrasonic technology that is suitable for many liquid and solid applications. Ultrasonic pulse signals are transmitted and reflected from the liquid or solid surface. The transmitter ‘listens’ for reflected signals (echoes) and measures the time delay between transmitting and receiving. The distance to the liquid surface is automatically calculated using the computed time delay.
An integral temperature sensor continuously measures the air temperature around the transmitter. It then computes the speed of sound in air, automatically compensating the Distance for temperature effects. The distance measurement can be sent through the 4–20 mA output.
Temperature Sensor BTS220R
The indoor temperature sensor BTS220R measures temperature by means of a Pt100-sensitive element for fast reaction. BTS200R are enclosed in a freely mountable small plastic box. Measurement range from -20 °C to 60 °C as well as size, and affordable price.
BTS220R are applicable for various indoor applications, room temperature control, control board temperature measurement, etc. All this, in addition to the small size, and the low price, make BTS220R a convenient solution for many Temperature measurement applications.
Temperature Transmitter BTT300
The BASI BTT300 series Intelligent Temperature transmitter with or without integrated sensor. Model list for BTT300 series intelligent temperature transmitter BTT302 two-wire system intelligent temperature transmitter BTT300 intelligent temperature transmitter BTT304 wireless intelligent temperature transmitter BTT301 two-wire system HART intelligent temperature transmitter.
Thanks to its large capabilities and low price, the BTT300 series can be very useful in different industrial applications requiring temperature conversion before following measurement and control.
Source : www.basi.se
Read More Articles :
- Zebra Skimmers Accessories
- Rechner Sensors – Capacitive Sensors and Level Measurement Systems
- Trafag – Sensors and Controls
- HPM Series Switch Control for Industrial
- Skon digital pressure gauges