Information of Measurement, Equipment, Mechanical, Electrical & Control
Information of Measurement, Equipment, Mechanical, Electrical & Control
Description Bamo BAMONIV TPS Hydrostatic Level Transmitter is designed for hydrostatic level measurement in aggressive media that is clear or slightly contaminated. Wet parts are of PVDF or PP, the seal of FPM and the cable of FEP. It measures the level according to the principle of hydrostatic pressure measurement. The probe is suspended with […]
Description TE 815 Aneroid Bellows for Level Sensor is a maintenance-free alternative to desiccant filters for vented gage transducer moisture protection. Made of flexible neoprene material attached to a polycarbonate mounting bracket, the bellows fluctuates with changes in atmospheric pressure maintaining a constant barometric reference. Note that the use of the bellow results in a […]
Description Bamo PVDF BAMONIV Hydrostatic Level Transmitter is designed for level measurement on aggressive, viscous or contaminated liquids in non-pressurized tanks. It operates according to the principle of hydrostatic pressure measurement. The pressure on the sensor increases proportionally with the depth of immersion. BAMONIV integrates ceramic cell and delivers a 4-20 mA signal proportional to […]
Description Bamo INTERNIV 590 Level Electronic Gauge for Diesel is simplest by use of a fitting on tank and/or a junction box BJSC. The probe may be freely suspended. It is recommended not to let the probe laying down on the tank bottom to avoid deposits on the diaphragm. Junction box BJSC, pressure compensated, hold […]
Overview Bamo BJSC Atmospheric Pressure Balanced is carried out by means of the cable gland, centered below the fitting. For aggressive chemicals, it is recommended to use the model BJSC-A with a PVDF cable gland. A vent filter on the front of housing, insures a good balance with atmospheric pressure for hydrostatic level sensors. Bamo […]
Description Bamo NIVAPRESS SGE-25 Hydrostatic Level Transmitter is simplified by the use of a fastening system, such as a suspension clip (a) or/and a BJSC holder (b). The probe can hang freely at the end of the cable or lie down at the bottom of the tank. The junction box BJSC with pressure compensation, allows to […]
