Utility Metering Flow Computer KEPmeter ES-749Indonesia Industrial Parts

Description

Utility Metering Flow KEPmeter ES-749 Computer for a variety of flowmeter types in liquid, gas, steam, and heat applications. Multiple flow equations are available in a single instrument with many advanced features. The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is supported versatility of the Flow Computer permits a wide measure of versatility within the instrument package.

The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument. Applications Include: Steam Mass, Steam Heat, Natural Gas, Fuel 0il, Compressed Air, Chilled Water Only, and Heated Water Only including Low DeltaT Cutout.

The isolated analog output can be chosen to follow the volume flow, corrected volume flow, mass flow, heat flow, temperature, pressure, or density by means of a menu selection. Most hardware features are assignable by this method.

The user can assign the standard RS-232 Serial Port for external data logging, transaction printing, or for connection to a modem for a remote meter reading. A Service or Test mode is provided to assist the user during start-up system check out by monitoring inputs and exercising outputs. The system setup can also be printed.

Utility Metering Flow KEPmeter ES-749 Feature

“EZ Setup”- Guided Setup for First-Time Users
Liquid, Gas, Steam and Heat Flow Equations
Utility Metering – Steam, Heating/Cooling, Chilled Water, Natural Gas, Compressed Air
Menu Selectable Hardware & Software Features
Internal Data Logger
Isolated Pulse and Analog Outputs Standard
RS-232 Port Standard, Provides Power for Modem
RS-485 with Modbus RTU Optional
Internal Communication Card OptionSupports: BACnet IP, BACnet MS/TP, Metasys N2, Modbus TCP, AB Ethernet IP, AB DF1, LonWorks*
Windows™ Setup Software
NX19 Gas Equations, Stacked DP Transmitters
DDE Server & HMI Software Available
Remote Metering by External Wireless or Modem
Attractive Wall Mount Enclosure Available

Utility Metering Flow KEPmeter ES-749 Specifications:

Environmental

Operating Temperature: 0 to +50 C
Storage Temperature: -40 to +85 C
Humidity : 0-95% Non-condensing
Materials: UL, CSA, VDE approved

Display

Type: 2 lines of 20 characters
Types: Backlit LCD, OLED, and VFD ordering options
Character Size: 0.2” nominal
User-selectable label descriptors and units of measure

Keypad

Keypad Type: Membrane Keypad with 16 keys
Keypad Rating: Sealed to NEMA 4X / IP65

Enclosure

Enclosure Options: Panel, Wall, Explosion Proof
Size: See Dimensions
Depth behind panel: 6.5” including mating connector
Type: DIN
Materials: Plastic, UL94V-0, Flame retardant
Bezel: Textured per matt finish

Power Input

The factory-equipped power option is internally fused.
An internal line-to-line filter capacitor is provided for added transient suppression. MOV protection for surge transient is also supported
Universal AC Power: 85 to 276 Vrms, 50/60 Hz
DC Power Option: 24 VDC (16 to 48 VDC)
Power Consumption
AC Power: 6.5 V/A
DC Power: 300 mA max.

Flow Meter Types:

Linear: Vortex, Turbine, Positive Displacement, Magnetic, GilFlo, ILVA, Mass Flow and others
Square Law: Orifice, Venturi, Nozzle, V-Cone, Wedge,
Averaging Pitot, Target, Verabar, Accelabar, and others
Multi-Point Linearization: May be used with all flowmeter types. Including 16 point, UVC, and dynamic
compensation.

Flow Inputs:

Analog Input:

Accuracy: 0.02% FS at 20° C
Ranges Voltage: 0-10 VDC, 0-5 VDC, 1-5 VDC
Current: 4-20 mA, 0-20 mA,4-20 mA stacked, 0-20 mA stacked
Basic Measurement Resolution: 16 bit
Update Rate: 4 updates/sec
Automatic Fault detection: Signal over/under range,
Current Loop Broken
Calibration: Operator assisted learning mode
Extended calibration: Learns Zero and Full Scale of each range
Fault Protection:
- Fast Transient: 500 V Protection (capacitive clamp)
- Reverse Polarity: No ill effects
- Over-Voltage Limit: 50 VDC Over voltage protection
- Over-Current Protection: Internally current limited protected to 24VDC

Pulse Inputs:

Number of Flow Inputs: one Input
Impedance: 10 k ? nominal
Trigger Level: (menu selectable)
- High Level Input
  - Logic On: 2.5 to 30 VDC
  - Logic Off: 0 to 2 VDC
- Low Level Input (mag pickup) Selectable sensitivity:
  - 10 mV and 100 mV
  - Minimum Count Speed: 0.25 Hz (to maintain rate display)
  - Maximum Count Speed: Selectable: 0 to 50 kHz
  - Overvoltage Protection: 50 VDC

User Entered Stored Information (EEPROM / Nonvolatile RAM)

Transmitter Ranges, Signal Types
Fluid Properties (specific gravity, expansion factor, specific heat, viscosity, isentropic exponent, combustion heating value, Z factor)
Units Selections (English/Metric)
Language Translations (optional)

Data Sheet: ES749-utility-metering-flow-computer

Reference: https://kepmeters.com

Another Article: