SP Loudspeaker Amphenol-ConnectorsIndonesia Industrial Parts

SP Loudspeaker Amphenol-Connectors are available in 2 or 4 pole chassis mount connectors. The durable thermoplastic housings are fitted with high power contacts to ensure optimal current carrying capacity. Completely intermatable with industry standard loudspeaker connections.

SP Loudspeaker Amphenol-Connectors Descriptions

Amphenol’s range of loudspeaker connectors has been further enhanced with the introduction of the SP Series. Designed to complement the popular EP/AP Series, we now offer a range of loudspeaker connectors to suit most applications. SP Series chassis connectors are available in industry-standard PCB footprints with solder tabs. SP Series cable plugs are available with screw or solder terminals.

Features

Quick-release, vibration resistant latch lock
2 or 4 pole
Solder tabs, PCB Contacts, Solder or Screw Terminals
Chuck type or PG Gland cable clamp
Various mounting hole options
30A Current rating
Thermoplastic or Metal housing (Cable Plugs)
UL, cUL recognized components (File no. E339831)
Industry-standard mating

Options

Solder termination / Tab or Printed Circuit Board versions, Screw Terminals
Nickel-Plated Zinc Alloy shell
Black finished Zinc Alloy shell

STANDARD DATA SP SERIES CONNECTORS

		VALUE
GENERAL CHARACTERISTICS	Number of contacts	2 or 4
	Termination (Chassis)	Printed Circuit Board (PCB) or Solder Tabs 3/16”
	Termination (Cable Plugs)	Screw or Solder Terminals
	Flammability	UL94HB
	Environmental	Complies with EU RoHS 2 Directive 2011/65/EU
ELECTRICAL CHARACTERISTICS	Service Voltage RMS	133V ¹⁾
	Test Voltage AC RMS	1500V
	Current carrying capacity	30A
	Typical Contact Resistance	?3m?
	Insulation Resistance (initial)	?2G?
	Insulation Resistance (after damp heat test)	?1G?
CLIMATIC CHARACTERISTICS	Protection Class (Mated Condition)	IP20 (IP40)
	Operating Temperature	-25?C to +75?C (-13°F to +167°F)
MECHANICAL CHARACTERISTICS	Weight** – Chassis Connectors	12g (0.026lb)
	Weight** – Cable Plug
	– Thermoplastic	44g (0.097lb)
	– Metal	65g (0.143lb)
	Weight** – Cable Plug PG
	– Thermoplastic	44g (0.097lb)
	– Metal	65g (0.143lb)
	Weight** – Cable Plug PG S/Relief
	– Thermoplastic	68g (0.150lb)
	– Metal	89g (0.196lb)
	Typical Cable retention force	200N
		(Subject to cable material and O.D.)
	Cable O.D range	2 pole	4 pole
	– Chuck Clamp	5-10mm (0.19” – 0.39”)	9-14mm (0.35” – 0.55”)
	– PG16 Gland	6-12mm (0.23” – 0.47”)	8-14mm (0.31” – 0.55”)
	– PG16 Gland S/Relief	9-14mm (0.35” – 0.55”)	9-14mm (0.35” – 0.55”)
	Conductor Size
	– Screw Terminals	1.5mm² – 4mm² (AWG16 – AWG12)
	– Solder Bucket	1.5mm² – 6mm² (AWG16 – AWG10)
	Mechanical Operations		5000 mating cycles
MATERIALS	Connector Shell / Finish
	– Cable Plug Thermoplastic	PA66 GF30 / Black
	– Cable Plug Metal	Diecast Zinc Alloy / Nickel or Black
	Insulators
	– Chassis	PA66 GF20
	– Cable Plugs	PA66 GF30
	Cable Boot / Backshell	Santoprene / PA6 GF 15
	Cable Clamp (Chuck)	P.O.M
	Cable Clamp (PG)	Polyamide / EPDM
	Sleeve	PBT
	Contact Chassis
	– Material / Plating	Phosphor Bronze / Silver
	Contact Cable Plug
	– Material / Plating	Brass / Silver