Nemalux ARTSU Rapidly Deployable Lighting Structures

Description

Nemalux ARTSU Rapidly Deployable Lighting Structures, The ARTSU saves time, money, and lives. Many trip and fall incidents at an industrial workplace can be traced back to poor lighting as well as luminaire maintenance. Replacing a luminaire or conducting scheduled maintenance at an industrial worksite can be a labor-intensive and dangerous task.

The Nemalux ARTSU structure moves a light fixture to a safe working height in minutes without the need for ladders or scaffolding. Integration into new facility design or retrofitted existing sites is simplified with the use of additional clamping hardware that can be connected to present structures.

Lowering the installed system is simple and requires just a socket wrench. The MR LED light with the Yoke Mount bracket (MR-YM) on the Articulating Strut Pole Assembly can be shipped as a complete assembly including all cabling pre-wired to the included junction box, ready for install as well as in-and-out-wiring.

Nemalux ARTSU

ARTSU – Articulating Strut Pole Assembly support structure removes the need for ladders, scaffolding, & lifts.

• Support structure made from marine grade extruded aluminum
• Stainless steel external fasteners
• Available with and without the MR light fixture
• Available as a pre-assembled and crated package consisting of light fixture, wiring,
• junction box as well as a mounting brackets
• Weight: 18.6 kg | 41.0 lbs w/MR fixture

The ARTSU saves time, money, and lives. Many trip and fall incidents at an industrial workplace can be traced back to poor lighting as well as luminaire maintenance. Replacing a luminaire or conducting scheduled maintenance at an industrial worksite can be a labor-intensive and dangerous task.

The Nemalux ARTSU structure moves a light fixture to a safe working height in minutes without the need for ladders or scaffolding. Integration into new facility design or retrofitted existing sites is simplified with the use of additional clamping hardware that can be connected to present structures. Lowering the installed system is simple and requires just a socket wrench.

The MR LED light with the Yoke Mount bracket (MR-YM) on the Articulating Strut Pole Assembly can be shipped as a complete assembly including all cabling pre-wired to the included junction box, ready for install as well as in-and-out-wiring.

Nemalux ARTSU Dimensions

Nemalux ARTSU Mounting

Angle Iron Clamp: A1: ¼” Angle Iron clamping system supports 2”x2” to 3”x3” angle sizes

Handrail Clamp: H1: Clamping for 2” OD tubing.

MR Mounting: The MR is complete with the Yoke Mount (MR-YM)

Utilizing a copper-free and marine-grade aluminum alloy for the housing material, all electronics are well protected from environmental impacts and contaminants inside a pressure-equivalized IP66/67 rated enclosure. A multilayer powder coat prevents degradation of the alloy while allowing deployment in corrosive outdoor and indoor locations. Increased fin spacing promotes debris shedding as well as optimized airflow to maintain low operating temperatures for the internal power supply and LEDs.

Impact-resistant polycarbonate lenses provide maximum protection for LEDs as well as secondary optics. Advanced manufacturing processes allow for the inherited texturing of the protective lens, significantly improving the visual comfort of facility operators and reducing the potential for glare.

Perimeter bands surround all light-emitting surfaces to provide a full cut-off feature, enabling the use of the MR in sensitive environments requiring dark sky (IDA) listed luminaires.

Secondary optics provide a wide range of optical profiles to increase light fixture spacing and reduce the number of MRs required to achieve target illumination levels. A wide range of project implementations has shown the potential to reduce the number of lights required for a project by up to 30% when compared to hazardous and industrial-grade LED lights from most competitors.

Solder-free component replacements are possible with the MR at the end of life to allow the continued use of the luminaire by simply replacing power supplies and LED light engines / MCPCBs.

Three entry locations in ¾” NPT allow for through wiring, reducing the need for additional junction boxes.

Several standard mounting brackets allow common use cases for the MR such as walkways, hand-rails, stairways, platforms, pole tops, building perimeter, explosion-proof wall pack (indoor and outdoor), doorways, low-bays, conveyor belts, surface-mounted lights on modular equipment, interior and exterior illumination on marine vessels, saltwater rich locations and much more.

Nemalux’s MR series is one of the most versatile LED luminaires designed for industrial applications. Rated for hazardous (Class 1 Division 2 and Zone 2), marine (UL1598A), and ordinary location use, the MR series is a robust light fixture with optimized features to withstand challenging environments.

Features

• Replacement for traditional 75-150W HID fixture
• Supports 4 standard or 20 custom optical profiles
• Low 66mm profile for easy installation in tight locations
• A true replacement for standard Low Bay fixtures
• 7 easy versatile mounting options
• Superior lighting throw capabilities
• Design reduces glare and improves safety
• Built-in junction box to minimize installation time
• DLC Qualified on some SKUs

Reference : nemalux.com

Download : Datasheet

other Article:

• Nemalux Encapsulated RS Submersible
• Thermax Single Level Encapsulated Indicators Irreversible Labels
• Delta Mobrey GS Series Pressure Gauge
• Flux Eccentric Worm – Drive Pump F 550 GS
• Flux Eccentric Worm – Drive Pump F 550 GS