Description of Nidec Copal JC10 Single-turn Conductive Plastic Potentiometer

The JC10 potentiometer from Nidec Copal is a shift sensor that converts mechanical movement into an electrical signal in the form of an output voltage. Its operation is based on the working principle of a variable resistor, where the relative movement between the resistor and the moving contact (wiper) will produce a voltage change proportional to the magnitude of the mechanical shift.
Model of potentiometer
Wirewound Type
Precision wire winding technology has been used to achieve low noise and long life. Wirewound types include the single-turn J series for use in servo drives and the multiturn M series for use in settings.
Conductive Plastic Type
Special film resistors and original contact construction provide long life, with degradation that is theoretically infinitely small. Conductive plastic types include single-turn types and linear types, both for use in servo drives.
Cerment Type
The use of cermet resistors allows for low prices. The degradation is theoretically infinitely small. Cermet types are single-turn for use in servo drives and for settings.
Optical Contactless Type
The contactless configuration offers a much longer life and lower noise compared with the conventional contact method.
Features
- Compact (?10mm)
- Long life
- High resolution (Essentially infinite)
- High following characteristics
- Cost effective
- RoHS compliant
Applications
Nidec Copal Electronics’?products are widely used in various applications, mainly in industry.
- Vehicle,?Construction machine
- Medical equipment
- Analytical?/?Messuring equipment
- FA equipment
- Residential facility,?Security
- Social?infrastructure,?Commercial?tool,?etc.
Specifications
Electrical Characteristics
Nominal resistance value | 2 k?, 5 k?, 10 k? |
Resistance tolerance | ± 20% |
Resolution | Essentially infinite |
Independent linearity | ± 2% |
Effective electrical angle | 324° ± 5° |
Power rating (at 40 °C) | 0.125W |
Dielectric strength | 500Vrms, 1min |
Insulation resistance | 100 (at DC 500 V)M? minimum |
Temp. coefficient of resistance | ± 400ppm/°C |
Output smoothness | 0.1 % maximum |
Mechanical Characteristics
Mechanical angle | 360° continuous |
Rotational torque | 1.96 {20}mN·m {gf·cm}maximum |
Rotational life (cycles) | 5 million(cycles) |
Strength of tighten screw | 49 {5} N·cm {kgf·cm}maximum |
Environmental Characteristics
Operating temp. range | -30 ~ 80 °C |
Net weight | Approx. 3 g |
Protection grade | IP40 |
For More Information and Price : Nidec Copal JC10 Single-turn Conductive Plastic Potentiometer
Read More Article :
- Wenglor ZD200PCVT3 Through Beam Sensor
- Wenglor ZD6003 Through Beam Sensor
- Nidec Copal CRV16 Single-turn Conductive Plastic Potentiometer
- Werma – varioSIGN Innovative Signal Tower
- Werma – Traffic Light – Signal Beacon
You must be logged in to post a comment.