Dwyer TFP-LP Series Liquid Turbine Flow Meter

Dwyer TFP-LP Series Liquid Turbine Flow Meter

Dwyer TFP-LP Series Liquid Turbine Flow Meter are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. Couple this unit with a Series TM2 Flow Totalizer for a remote flow monitoring display. A power adapter or mating cable assembly is required for operation.

Turbine sensors with electrical transmission output for remote indication of liquid flow rate. Dwyer turbine flow transmitters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. A power adapter or mating cable assembly is required for operation.

Dwyer TFP-LP Series Features

  • These meters utilize a turbine wheel and electro-optical detection
  • convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging
  • Flow Totalizer for a remote flow monitoring display

Another Article:

Specification

Service Clean liquids compatible with wetted materials.
Wetted Materials PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.
Accuracy ±1% of full scale.
Linearity ±1% of full scale.
Repeatability ±0.2% of full scale.
Temperature Limits 41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of full scale per °C.
Pressure Limits 100 psig (6.8 bar).
Process Connection Compression fitting
Power Requirements 11.5 to 15 VDC.
Power Consumption 35 mA @ 12 VDC.
Output Signal 0 to 5 VDC: Minimum 2.5 kΩ load; Pulse: 7.5 VDC peak buffered square wave.
Electrical Connections Four-pin power and signal connector. A power adapter or mating cable required for operation.
Enclosure Rating IP10 (NEMA 1).
Weight 0.19 lb (85 g).
Agency Approvals CE.

Download Data Sheet: Series TFP-LP Liquid Turbine Flow Meter

Ref: dwyer-inst.com

Share