Delta Elektrogas LMV Linear Control ValveIndonesia Industrial Parts

Description

Delta Elektrogas Modulating valves LMV is used in combustion processes that require linear adjustment of air or gas flow. The flow varies proportionally to the opening angle of the inner mechanism, therefore flowrate is very predictable. The valves can be operated with stage control (3-point, MZ3 servomotor) or with continuous modulation (analog signals, MZ5 servomotor)

Function and Application

Delta Elektrogas LMV Linear Control Valve works using a 2-cylinder mechanism, allowing a linear variation of the flow according to mechanism position, thanks to specifically shaped gas orifices. The outer cylinder is fixed while the inner cylinder can be rotated by the actuator, opening or closing the resulting gas passage.

A flow adjustment is present and can be regulated acting on an external screw to set up easily the optimal working condition of the valve. Materials and mechanical tolerances are designed to assure low leakage, repeatability of the performance and reliability.

Instalation Of Delta Elektrogas LMV Control Valve

Specification of Delta Elektrogas LMV Valve

Connections
- Threaded f/f ISO 7-1 from Rp3/8 to Rp2½
- Flanged ISO 7005 PN16 from DN40 to DN80
Control Ratio 25.01.00
Ambient Temperature -15°C to +60°C (+5°F to +140°F)
Max. Working Pressure 500 mbar (50kPa)
Flow Capacity See Datasheet
Leakage Rate < 2% of maximum capacity
Filtering Element 600 µm
Material in contact with the gas
- Aluminum alloy
- Brass
- Stainless steel
- Plated steel
- Anaerobic adhesive
- Nitrile rubber (NBR)
- Fluoroelastomer (FPM)
- Acetal resin (POM)
Voltage rate 230 VAC 50/60 Hz
Servomotor
- MZ 110 VAC 50/60 Hz
- 24 VAC/DC
- (depending on servomotor type)
90° opening/closing time 7,5 … 120 sec (depending on servomotor type)