Description
AW-Lake Flow Rate Transmitter is ideal for batching, industrial process control, mobile hydraulic equipment and computer / PLC controlled hydraulic system monitoring applications. It is designed without delicate internal components to break, abrade, or corrode. The weather-tight construction includes a rugged cast aluminum enclosure built to NEMA 4X standard for installation outdoors. This variable area flow meter is used to measure air, gas, oil, and water. The transmitter provides a visual indication of flow rate that matches the transmitted output for direct reading.
AW-Lake Flow Rate Transmitter Applications:
- Simple to Install: All transmitters are factory calibrated and ship fully assembled. Simply install the transmitter into your system and apply power. No straight plumbing required at inlet or outlet.
- Industry Standard Outputs: Transmitters provide proportional analog or pulse outputs that will drive popular data acquisition devices, meters and analog input cards.
- Direct Reading: All transmitters provide a visual indication of flow rate that matches the transmitted output.
- Weather-Tight Construction: The rugged cast aluminum enclosure is built to NEMA 4X standard and allows installation outdoors and in environments where liquid tight seals are required.
- Rugged and Reliable: Without delicate internal components to break, abrade or corrode, the flow transmitter will provide many years of low-maintenance service
Features:
- Measuring Accuracy: ±2.0% of full scale
- 14 Flow Ranges: 0.1 to 150 GPM (0.5-550 LPM), 2-1300 SCFM (1-600 SLPS)
- Pressure Rating: Liquid: up to 6000 PSIG (410 bar), Air/Gas: 1000 PSIG (69 bar)
- Temperature Rating: Media: 185°F (85°C) Ambient: 185°F (85°C)
AW-Lake Flow Rate Transmitter Specification:
- Measuring Accuracy: ±2.0% of full scale
- Repeatability: ±1% of full scale
- Flow Measuring Range:
- 0.1-150 GPM (0.5-550 LPM)
- 2-1300 SCFM (1-600 SLPS)
- Maximum Operating Pressure:
- Liquids
- Aluminum & Brass: 3500 PSIG (240 Bar)
- Stainless Steel: 6000 PSIG (410 Bar)
- Air/Gas
- Aluminum and brass: 600 PSIG (40 Bar)
- Stainless steel: 1000 PSIG (69 Bar)
- Maximum Operating Temperature:
- Media: 185°F (85°C)
- Ambient: 185°F (85°C)
- Standard Calibration Fluids:
- Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
- Water meters: tap water @ 70°F (21°C), 1.0 sg
- Air meters: air @ 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar)
- Filtration Requirement: 74 micron filter or 200 mesh screen minimum
- Viscosity: Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory.
- Material Of Construction (Non-Wetted Components):
- Enclosure & Cover: PaintedAluminum
- Seals: Buna-N®
- Window: Pyrex®
- Din Connector: Polyamide
- Materials Of Construction (Wetted Components):
- Casing & End Ports:
- Anodized Aluminum, Brass, or Stainless Steel
- Seals:
- Anodized Aluminum:Buna-N® (STD), EPR, FKM, or Kalrez®
- Brass: Buna-N® (STD), EPR, FKM, or Kalrez®
- Stainless Steel 303: FKM with PTFE backup (STD), Buna-N®, EPR or Kalrez®
- Transfer Magnet:
- PTFE coated Alnico
- All other internal parts:
- Stainless steel
Download Data Sheet: Flow Rate Transmitter
Ref: aw-lake.com
Other Article:
- Flow Rate Alarm AW Lake
- Pneumatic Variable Area Flow Meter AW Lake
- Valcom Pressure Instrument
- AW-Lake Case Drain Flow Meter
- AW-Lake ZHM Positive Displacement Flow Meter