Table of Contents
Ultrasonic Water flow Meter
The Flowmasonic WUF500 Clamp On Ultrasonic Flow Meter is a state-of-the-art universal transit-time Flow meter designed using SLSI technology and low voltage broadband pulse transmission.
While principally designed for the clean liquid application, the instrument is tolerant of liquids with small amounts of air bubbles or suspended solids found in most industrial environments.
Flowmasonic WUF500 Clamp On Features
With distinctive features such as high precision, high reliability, high capability, and low cost, the Flowmeter features other advantages:
1. SLSI technology designed. Less hardware component, low voltage broadband pulse transmission, low consumption power, high reliability, anti-jamming, and outstanding applicability.
2. User-friendly menu designed. Parameter of pipe range, pipe material, pipe wall thickness, output signal, etc. can be conveniently entered via the windows.
U.S., British and Metric measurement units are available.
3. Daily, monthly and yearly totalized flow: Totalized flow for the last 64 days and months as well as for the last 5 years are may be viewed.
Power 0n/off function: allow the viewing of time and flow rate as power is switched on and off 64 times. Also, the Flowmeter has a manual or automatic amendment during offline sessions.
Self-contained signal output, open collector, frequency.
4. Parallel operation of positive, negative and net flow totalizes with scale factor (span) and 7 digit display, while the output of totalize pulse and frequency output transmitted via the open collector.
Baca Juga :
Flowmasonic WUF500 Clamp On Specification
|Flow Range||0∼±16 ft/s (0∼±5m/s)|
|Accuracy||±1.0% of measured value (for 0.5∼4.0 m/s or 1.5∼13 f/s)|
|Pipe Size||1 inch to 32 inches (25 mm to 800 mm)|
|Pipe Material||Carbon Steel, Stainless Steel, PVC
|Outputs||Pulse Output: 0∼9999 Hz, OCT, (min. and max. frequency is adjustable)|
|Relay Output : 1A/30VDC, 0.3A/125VAC|
|Analog Output (Optional): 4∼20mA max load 750Ω|
|Input Interface (optional)||RTD 2*PT100 interface excludes PT100 transducer|
|Two wires or three wires system 0 180 32 35|
|Communication Interface||RS323 (standard)|
|Baud rate 9600bps∼115200bps|
|Power Supply||10∼24VAC or 10∼36 VDC 1A (max)|
|Keypad||16 ( 4×4) key with tactile action|
|Display||40 character, 2 lines (20×2) lattice alphanumeric, backlit LCD|
|Humidity||Up to 99% RH, non-condensing|
|Transducer||Encapsulated design, IP68|
|Double-shielded Transducer Cable||Standard/Maximum cable length: 30 ft/ 1000ft (9m/305m)|
|Weight||Transmitter: approximately 0.7 kg|
|Transducer: approximately 0.4 kg|