Overview
SC Hydraulic Engineering is a leading manufacturer and designer of an ever growing line of high pressure, air-driven liquid pumps, as well as air and gas boosters which are being used in a variety of industries and applications.
SC Hydraulic Engineering works internationally through distribution and with manufacturers. We are continually developing new products to meet a never-ending stream of newly emerging applications and will continue to meet tougher, more demanding requirements.
General Information
The AB Series air booster is a compact, single-acting unit available in 1.7:1, 3.7:1 or 7:1 ratios. This booster is an inexpensive alternative for applications requiring 100-680 psi static holding pressures when low flow is acceptable.
The air drive and supply are the same so no extra plumbing is required and no electrical connections are needed. The compact and lightweight size, and ability to operate in any position, has broad appeal for in-plant, mobile machinery, and OEM applications. The units are pre-lubricated therefore air line lubrication is not required.
Feature
- Economical
- Requires No Lubrication
- Compact And Lightweight
- Single Acting, Single Stage
- Ideal For Oem Applications
- Pressures Up To 680-psi (Ab-7)
- Air Operated – Does Not Require Electricity
Application
- Engine air starter systems
- Top off high pressure tires
- Release spring actuated brakes
- Increase maximum torque on small air tools
- Top off and maintain pressure in die cushions
- Increase marginal air pressure to valve actuators
- Extra force for small air clamps, roll tensioners, assembly machines and air presses
Dimensions
Model Selection Number
SC Hydraulic Engineering AB-2, AB-4 & AB-7 Series Air Booster is a leading manufacturer and designer of an ever-growing line of high-pressure, air-driven liquid pumps, as well as air and gas boosters that are being used in a variety of industries and applications. Growing since 1953, we offer liquid pressures as high as 65,000 psig and can exceed 17,000 psig in gas pressures.
| MODEL SELECTION CHART | ||||||||
| Model No. | Maximum Rated Air Supply (Ps) | Maximum Rated Air Outlet (Po) | Connection Ports | Static Outlet | Actual Area Ratio | Displacement Per Stroke | ||
| Air Drive | Air Inlet | Air Outlet | Stall Pressure | (in3 per cycle) | ||||
| AB-2 | 150 psig | 300 psig | 1/4″ NPT | 1/4″ NPT | 2 Pa | 02.01 | 02.09 | |
| 10.3 bar | 21 bar | |||||||
| AB-4 | 150 psig | 600 psig | 1/4″ NPT | 1/4″ NPT | 4 Pa | 04.01 | 01.04 | |
| 10.3 bar | 41 bar | |||||||
| AB-7 | 150 psig | 700 psig | 1/4″ NPT | 1/4″ NPT | 7 Pa | 07.01 | .7 | |
Modification
M202 – Remote Pilot: This option provides a 1/8″ NPT female port for remotely controlling the start/stop of the pump by connecting an external air signal to actuate the air cycling valve.
Performance Chart
Source: schydraulic.com
Read more :
- SC Hydraulic Engineering L7 High Flow Liquid Pump
- SC Hydraulic GBT Series Two Stage – Single Acting Gas Booster
- Gas Booster Single Stage Double Acting SC Hydraulic Engineering
- GB Series Gas Booster Single Stage – Single Acting SC Hydraulic Engineering
- Gas Booster Single Stage – Single Acting Double Head SC Hydraulic Engineering
You must be logged in to post a comment.