Brainchild Temperature Transmitter and ControllerIndonesia Industrial Parts

Brainchild Temperature Transmitter and Controller Pengontrol Proses dan Suhu Generasi baru berbahan rendah mikroprosesor PID berbasis seri Fuzzy logic controller menggabungkan dua Layar LCD yang mudah dibaca yang menunjukkan nilai Proses (PV) dan Nilai set point (SP). Teknologi Fuzzy Logic yang tergabung dalam seri pengontrol ini memungkinkan proses untuk mencapai titik setel yang telah ditentukan dalam waktu singkat dengan minimum overshoot selama Start Up (Power ON) atau gangguan beban eksternal. Layar LCD Multi Warna Input A-D 18 Bit Akurasi Tinggi dan Output D-A 15 Bit Tingkat pengambilan Sample Cepat dalam 200 m/sec Input Universal Thermocouple, RTD, mA, V Kontrol Fuzzy + PID Auto Tunning Fungsi Soft-Start Memungkinan RS-485 dan Transmisi Analog 2 Program masing-masing dengan 8 Segmen Jalan & Rendam Input CT untuk Deteksi Heater-Break Remote Setpoint Hingga 6 Input Acara Transfer Bumpless Perlindungan Terkunci Navigasi Menu Dua Arah Approvals: UL, cUL, CE, RoHS, REACH, WEEE Specification Fisik Process and Temperature Controller -C22 Type Specification C22 DIN Size 1/32 Dimensions (W* H* D) (mm) 48* 24* 92 Depth Behind Panel (mm) 84 Cut Out Dimensions (mm) 45* 22.2 Weight (gram) 120 Brainchild C62 Process and temperature controller Type Specification C62 DIN Size 1/16 Mounting Panel Dimensions (W* H* D) (mm) 48* 48* 59 Depth Behind Panel (mm) 50 Cut Out Dimensions (mm) 45* 45 Weight (gram) 160 Brainchild C82 Process and temperature controller Type Specification C82 DIN Size 1/8 Mounting Panel Dimensions (W* H* D) (mm) 48* 96* 59 Depth Behind Panel (mm) 50 Cut Out Dimensions (mm) 45* 92 Weight (gram) 220 Brainchild C83 Process and temperature controller Type Specification C83 DIN Size 1/8 Mounting Panel Dimensions (W* H* D) (mm) 96* 48* 59 Depth Behind Panel (mm) 84 Cut Out Dimensions (mm) 92*45 Weight (gram) 220 Brainchild C72 Process and temperature controller Type Specification C72 DIN Size 9/64 Mounting Panel Dimensions (W* H* D) (mm) 72* 72* 59 Depth Behind Panel (mm) 50 Cut Out Dimensions (mm) 68*68 Weight (gram) 190 Brainchild C42 Process and temperature controller Type Specification C42 DIN Size 1/4 Mounting Panel Dimensions (W* H* D) (mm) 96* 96* 59 Depth Behind Panel (mm) 50 Cut Out Dimensions (mm) 92*92 Weight (gram) 290 Brainchild R22 Process and temperature controller Type Specification R22 DIN Size - Mounting DIN Rail Dimensions (W* H* D) (mm) 22.5* 96* 83 Depth Behind Panel (mm) - Cut Out Dimensions (mm) - Weight (gram) 160 Model C22 C62 C82 C83 C72 C42 R22 Power supply 90 to 250 VAC, 47 –63 Hz ; 11 to 40 VDC / 20 to 28 VAC, 47– 63 Hz Power consumption 8VA 4W Max 10VA 5W Max 12VA 6W Max 8VA 4W Max Signal Input Model C22 C62 C82 C83 C72 C42 R22 Type Thermocouple (J, K, T, E, B, R, S, N, L, U, P, C, D), RTD (PT100 (DIN), PT100 (JIS)), Current (mA), Voltage (Volts) Resolution 18 Bit Sampling Rate 5 Times / Second (200 msec) Maximum Rating -2 VDC minimum, 12 VDC maximum Input Characteristics Type Range Accuracy @ 25°C Input Impedance J -120 °C to 1,000.0 °C ±2 ºC 2.2 M? K -200 °C to 1,370.0 °C ±2 ºC 2.2 M? T -250 °C to 400.0 °C ±2 ºC 2.2 M? E -100 °C to 900.0 °C ±2 ºC 2.2 M? B 0 °C to 1,820.0 °C ±2 ºC 2.2 M? R -0 °C to 1,767.8 °C ±2 ºC 2.2 M? S -0 °C to 1,767.8 °C ±2 ºC 2.2 M? N -250 °C to 1,300.0 °C ±2 ºC 2.2 M? L -200 °C to 1900.0 °C ±2 ºC 2.2 M? U -200 °C to 600.0 °C ±2 ºC 2.2 M? P 0 °C to 1,395.0 °C ±2 ºC 2.2 M? C 0 °C to 2,300.0 °C ±2 ºC 2.2 M? D 0 °C to 2,300.0 °C ±2 ºC 2.2 M? PT100(DIN) -200 °C to 850.0 °C ±0.4 ºC 1.3 K? PT100(JIS) -200 °C to 600.0 °C ±0.4 ºC 1.3 K? mA -3 mA to 27 mA ±0.05 % 2.5 ? V -1.3 VDC to 11.5 VDC ±0.05 % 1.5 M? Temperature Effect 1.5 ?V / for all inputs except mA input, 3.0 ?V / for mA Sensor Lead Resistance Effect Thermocouple:0.2 ?V / ?:3- wire RTD:2.6 / ? of Difference of Resistance of two leads:2- wire RTD:2.6 / ? of Sum of Resistance of two leads Burn-out Current 200nA Common Mode Rejection Ratio (CMRR) 120 dB Normal Mode Rejection Ratio (NMRR) 55 dB Sensor Break Detection Sensor open for Thermocouple and RTD inputs, sensor short for RTD input, below 1 mA for 4 – 20 mA input, below 0.25 VDC for 1 – 5 VDC input, not available for other inputs Sensor Break Responding Time Within 4 seconds for Thermocouple and RTD inputs, 0.1 seconds for 4 – 20 mA and 1 – 5 VDC inputs Remote Set Point Input Model C22 C62 C82 C83 C72 C42 R22 Type Linear Current, Linear Voltage Range -3 mA to 27 mA, -1.3 VDC to 11.5 VDC Accuracy ± 0.05% Remote Set Point Option Not Available Available Not Available Input Impedance Current : 2.5 ?, Voltage : 1.5 M? Resolution 18 Bits Sampling Rate 1.66 Times / Second Maximum Rating 280 mA maximum for Current Input, 12 VDC maximum for Voltage Input Temperature Effect ±1.5 ?V /°C for Voltage Input, ± 3.0 ?V /°C for Current Input Sensor Break Detection Below 1 mA for 4 – 20 mA input, below 0.25 VDC for 1 – 5 VDC input, not available for other inputs Sensor Break Responding Time 0.1 second Event Input Model C22 C62 C82 C83 C72 C42 R22 Number of Event Input 1 2 6 6 2 6 2 Logic Low -10 VDC minimum, 0.8 VDC maximum Logic High 2 VDC minimum, 10 VDC maximum Function Refer to the user manual CT Input Model C22 C62 C82 C83 C72 C42 R22 CT Type CT98-1 Accuracy ± 5 % of Full-Scale Reading, ± 1 digit maximum Input Impedance 294 ? Measurement Range 0 to 50 A-VAC Output of CT 0 to 5 VDC Sampling Rate 1 Time / Second Output 1 / Output 2 Model C22 C62 C82 C83 C72 C42 R22 Type Relay, Pulsed Voltage, Linear Voltage, and Linear Current Relay Rating 2 A, 240 V AC, 200,000 Life Cycles for Resistive Load Pulsed Voltage Source Voltage 5 VDC, Current Limiting Resistance 66 ? Linear Output Resolution 15 Bits Linear Output Regulation 0.02 % for full load change Linear Output Settling Time 0.1 Second (Stable to 99.9 %) Isolation Breakdown Voltage 1,000 V AC Temperature Effect ± 0.01% of Span /°C Load Capacity of Linear Output Linear Current 500 ? maximum, Linear Voltage10 K? minimum Alarm Model C22 C62 C82 C83 C72 C42 R22 Maximum Rating 2 A, 240 V AC, 200,000 Life Cycles for Resistive Load Alarm Function Dwell Timer, Deviation Low, Deviation High, Deviation Band Low, Deviation Band High, Process High, Process Low, Range Low, Range High, Range High Low, Heater Break, Heater Short, Profile End, Profile Holdback Alarm Mode Latching, Holding, Normal, Latching / Holding, Set Point Holding Dwell Timer 0.1 to 4,553.6 Minutes Data Communication Model C22 C62 C82 C83 C72 C42 R22 Interface RS-485 Protocol Modbus RTU (Slave Mode) Address 1 to 247 Baud Rate 2.8 KBPS to 115.2 KBPS Parity Bit None, Even or Odd Stop Bit 1 or 2 Bits Data Length 7 or 8 Bits Communication Buffer 160 Bytes Analog Retransmission Model C22 C62 C82 C83 C72 C42 R22 Output Signal 4 – 20 mA, 0 – 20 mA, 0 – 10 VDC Resolution 15 Bits Accuracy ± 0.05 % of Span ± 0.0025% / °C Load Resistance 0 to 500 ? for Current Output, 10 K? minimum for Voltage Output Output Regulation 0.01 % for full load change Output Setting Time 0.1 Second (Stable to 99.9 %) Isolation Breakdown 1,000 VAC minimum Integral Linearity Error ±0.005 % of Span Analog Retransmission Model C22 C62 C82 C83 C72 C42 R22 Temperature Effect ±0.0025 % of Span / °C Saturation Low 0 mA or 0 VDC Saturation High 22.2 mAor 5.55 VDC,11.1 VDC minimum Linear Output Range 0 – 22.2mA (0 – 20mA / 4 – 20mA), 0 – 5.55VDC (0 – 5VDC / 1 – 5VDC), 0 – 11.1VDC (0 – 10VDC) User Interface Model C22 C62 C82 C83 C72 C42 R22 Keypad 4 Keys Display Type 4 Digit LCD Display Number of Display 2 3 2 Upper Display Size 0.4” 0.58” 0.7” 0.7” 0.58” 0.98” 0.98” Lower Display Size 0.19” 0.3” 0.4” 0.4” 0.32” 0.55” 0.25” Programming Port Model C22 C62 C82 C83 C72 C42 R22 Interface Micro USB PC Communication Function Parameter Configuration and Firmware Upgrade Control Mode Model C22 C62 C82 C83 C72 C42 R22 Output 1 Reverse (Heating) or Direct (Cooling) Action Output 2 PID cooling control, Cooling P band 50 ~ 300 % of PB, Dead band -36.0 ~ 36.0 % of PB ON-OFF 0.1 °C~50.0 °C( 0.1~ 90.0 °F) hysteresis control (P band 0) P or PD 0 – 100.0 % off-set adjustment PID Fuzzy logic modified Proportional band 0.1 °C~500.0°C (0.1~900.0 ), Integral time 0-3,600 Seconds, Derivative time 0-360.0 seconds Cycle Time 0.1 to 90.0 Seconds Manual Control Heat (MV1) and Cool (MV2) Auto-tuning Cold Start and Warm Start Failure Mode Auto transfer to manual mode while sensor breaks or A – D Converter damage Ramping Control 0~500.0 °C (0~900.0°F )/Minute or 0~500.0 °C (0~900.0 °F )/ Hour Ramp Rate Digital Filter Model C22 C62 C82 C83 C72 C42 R22 Function First Order Time Constant 0, 0.2, 0.5, 1, 2, 5, 10, 20, 30, 60 Seconds Programmable Profiler Model C22 C62 C82 C83 C72 C42 R22 Availability NO NO Option NO No of Programs N/A N/A 4/2/1 N/A Number of Segments / Program N/A N/A 4/8/16 N/A Environmental and Physical Specifications Model C22 C62 C82 C83 C72 C42 R22 Operating Temperature -10 °C to 50 °C Storage Temperature -40 °C to 60 °C Humidity 0 to 90 % RH (Non - Condensing) Altitude 2,000 Meters maximum Pollution Degree II Insulation Resistance 20 M? minimum (@ 500 VDC) Dielectric Strength 2,000 V AC, 50 / 60 Hz for 1 Minute Vibration Resistance 10 to 55 Hz, 10 m / s2 for 2 Hours Shock Resistance 200 m / s2 (20 g) Molding Flame Retardant Polycarbonate Approval Standards Model C22 C62 C82 C83 C72 C42 R22 Safety UL61010-1, CSA 22.2 No.61010-1-12, EN61010-1 (IEC1010-1), RoHS, REACH Protective Class IP65 for panel (in the process), IP20 for terminals and housing, all indoor use EMC EN61326 Visit wiratama-ma for more info Read More Articles: Human Machine Interface (HMI) Brainchild Brainchild PR10 Touch screen Paperless Recorders Paperless Recorder Brainchild PR Series Touch screen Brainchild Paperless Recorder PR10 Brainchild Human Machine Interface (HMI) Type 450 Brainchild Configuration & Editing Software Panel Studio Brainchild RSC Rail Signal Conditioner

Model	C22	C62	C82	C83	C72	C42	R22
Function	First Order
Time Constant	0, 0.2, 0.5, 1, 2, 5, 10, 20, 30, 60 Seconds Programmable

Model	C22	C62	C82	C83	C72	C42	R22
Availability	NO	NO	Option	NO
No of Programs	N/A	N/A	4/2/1	N/A
Number of Segments / Program	N/A	N/A	4/8/16	N/A

Model	C22	C62	C82	C83	C72	C42	R22
Operating Temperature	-10 °C to 50 °C
Storage Temperature	-40 °C to 60 °C
Humidity	0 to 90 % RH (Non – Condensing)
Altitude	2,000 Meters maximum
Pollution	Degree II
Insulation Resistance	20 M? minimum (@ 500 VDC)
Dielectric Strength	2,000 V AC, 50 / 60 Hz for 1 Minute
Vibration Resistance	10 to 55 Hz, 10 m / s2 for 2 Hours
Shock Resistance	200 m / s2 (20 g)
Molding	Flame Retardant Polycarbonate

Model	C22	C62	C82	C83	C72	C42	R22
Safety	UL61010-1, CSA 22.2 No.61010-1-12, EN61010-1 (IEC1010-1), RoHS, REACH
Protective Class	IP65 for panel (in the process), IP20 for terminals and housing, all indoor use
EMC	EN61326