Description
The PV Series is a stainless steel vertical multistage pump available in eight sizes with up to 26 stages. These pumps are suitable for clean water or liquids. They are widely used for high buildings, plants, mining, city water supply systems and irrigation.
Specification
- Ambient Temperature: To a maximum +104°F (40°C).
- Liquid Temperature: Standard design: -5°F to +194°F (-15°C to 90°C ).
- Liquid Temperature: Hot water design: 5°F to +248°F (-15°C to 120°C ).
- Min. Suction Pressure: Two (2) feet (0.6m) above required NPSH.
- Electric Motor standard supplied as: 60 Hz, single phase 110v or three phase 220v, aluminum casing, IP54, class F. 50 Hz, single phase 220v or three phase 380v, aluminum casing, IP54, class F.
- Pump material: 304 or 316 stainless steel.
Model and Material
| PV 1, 3 | ||
|---|---|---|
| No. | Name | Material |
| 1 | Motor | – |
| 2 | Pump Head | Cast Iron |
| 4 | Mechanical Seal | – |
| 5 | Top Diffuser | 304 Stainless Steel |
| 6 | Diffuser | 304 Stainless Steel |
| 7 | Support Diffuser | 304 Stainless Steel |
| 8 | Inducer | 304 Stainless Steel |
| 11 | Bearing | – |
| 12 | Impeller | 304 Stainless Steel |
| 13 | Shaft | 304 Stainless Steel |
| 14 | Impeller Sleeve | 304 Stainless Steel |
| 15 | Cylinder | 304 Stainless Steel |
| 16 | Coupling | – |
| SS304 Type | ||
| 3 | Seal Base | 304 Stainless Steel |
| 9 | Inlet & Outlet Chamber | 304 Stainless Steel |
| 10 | Base Plate | Cast Iron |
 Paragon PV 2, 4 Series Vertical Multistage Pump |
|
| PV 2, 4, 8, 12, 16, 20 | ||
|---|---|---|
| No. | Name | Material |
| 1 | Motor Flange | Cast Iron |
| 2 | Pump Shaft | 304 Stainless Steel |
| 3 | Mechanical Seal | 304 Stainless Steel |
| 4 | Top Diffuser | – |
| 5 | Diffuser | 304 Stainless Steel |
| 6 | Support Diffuser | 304 Stainless Steel |
| 7 | Inducer | 304 Stainless Steel |
| 8 | Bearing | 304 Stainless Steel |
| 9 | Impeller | Cast Iron |
| 10 | Shaft | 304 Stainless Steel |
| 11 | Impeller Sleeve | 304 Stainless Steel |
| 12 | Cylinder | – |
| 13 | Coupling | F-4 |
| 14 | Seal Base | 304 Stainless Steel |
| 15 | Inlet & Outlet Chamber | – |
| 16 | Base Plate | – |
| PV 32, 45, 65, 85 | ||
|---|---|---|
| No. | Name | Material |
| 1 | Motor Flange | Cast Iron |
| 2 | Pump Shaft | 304 Stainless Steel |
| 3 | Mechanical Seal Seat | 304 Stainless Steel |
| 4 | Mechanical Seal | – |
| 5 | Diffuser | 304 Stainless Steel |
| 6 | Impeller | 304 Stainless Steel |
| 7 | Cylinder | 304 Stainless Steel |
| 8 | Base | 304 Stainless Steel |
| 9 | Base Plate | Cast Iron |
| 10 | Bearing | – |
| 11 | Inducer | 304 Stainless Steel |
| 12 | Support Diffuser | – |
| 13 | Bearing | – |
| 14 | Seal Ring | – |
| 15 | Top Diffuser | 304 Stainless Steel |
| 16 | Coupling | – |
| 17 | Motor | – |
| PV 32, 45, 65, 85 | ||
|---|---|---|
| No. | Name | Material |
| 1 | Bracket | Cast Iron |
| 3 | Mechanical Seal | – |
| 4 | Discharge | 304 Stainless Steel |
| 5 | Support Diffuser | 304 Stainless Steel |
| 6 | Diffuser | 304 Stainless Steel |
| 7 | Inducer | 304 Stainless Steel |
| 9 | Base Plate | Cast Iron |
| 11 | Impeller | 304 Stainless Steel |
| 12 | Shaft | 304 Stainless Steel |
| 13 | Bearing | – |
| 14 | Cylinder | 304 Stainless Steel |
| 15 | Coupling | – |
| Cast Iron Type | ||
| 2 | Pump Head | Cast Iron |
| 8 | Inlet & Outlet Chamber | Cast Iron |
| SS304 Type | ||
| 2 | Pump Head | 304 Stainless Steel |
| 8 | Inlet & Outlet Chamber | 304 Stainless Steel |
You must be logged in to post a comment.