Bamo Venturi channel flow calculator BAMOPHOX 759

The display allows easy reading of flow rate (or water level height) and Total indication. Through a user-friendly menu, relays are dedicated and configured for limits, alarms, and sampler operation. The 4-20 mA input (proportional to the water level height) comes from a BAMOBUL (bubbling level measurement) or an ultrasonic level transmitter.

The BAMOPHOX 759 converts this signal directly in flow rate with the memorized curves of our range of Venturi open channel ISO 4359 and standardized Weir plates V or U). On request, we may configure the instrument for a special curve. An output of 4-20 mA is a copy of the flow rate. A pulse output is available for an external Total indicator. An optional RS422 is available for direct transfer to a computer.

Input 4-20 mA for level height
Alphanumeric backlighted LCD display:
- Level, Flow rate,
- Daily volume,
- Total indicator
Curves memorized for Venturi channels, standard weir plates V or U
4 relay outputs (Normally Open contacts)
- Contact for flow rate limit
- Contact for sampler
- Contact for external pulse counting
1 analogue output 0/4-20mA galvanic insulated
2 models available:
- Panel mounting 72 x 144 (759E)
- Wall mounting IP 65 (759M)
OPTIONS:
- RS 422 /J-BUS + LOGGER
- Extension for 2nd measurement input

Extension Terminal Bamo Venturi channel flow calculator Bamophox 759

An extension terminal (wall, panel mounting, or DIN rail mounting):

Allows a second measurement parameter (Turbidity, pH, Conductivity, Chlorine, Flow depending on the model)
The data from this blind device are displayed on the main device (second-line display).
A 4 wires shielded cable is necessary to link both devices (maximum length of 500m)
The options RS422 and the data logger are shared between both BAMOPHOX.

Source: www.bamo.fr

Read More Articles :