CS Instruments Standard Pressure Sensor CS 10 And CS 16Indonesia Industrial Parts

Descriptions of CS Instruments Standard Pressure Sensor CS 10 And CS 16

CS Instruments Standard Pressure Sensor CS 10 And CS 16 0…10 and 0…16 bar measures with an accuracy of full scale 1%. Since 2002, the name CS INSTRUMENTS stands for proven and innovative measurement technology for compressed air and gases, with subsidiaries and sales partners worldwide.

The number of employees increased from one employee in the founding year 2002 to approximately 85 employees in Germany and 120 employees worldwide (as of June 2022).

Features

Standard pressure ratio 0…10 and 0…16 bar
measures with accuracy of full scale 1%.
For more exact measurements in the same pressure ratio, we offer the CS 10/ CS 16 sensors with an accuracy of full scale 0,5%.
Output signal: 4…20 mA, 2-Wire
Power supply: 8…30 VDC

Specifications

Wetted parts: 316L
Housing: 316L
Non-linearity: 0,5 BFSL
Parameter: bar
Type of pressure:: relative, absolute, vacuum
Measuring range: 0…16 bar, 32 bar overpressure limit
Process connections: G 1/4A according to DIN 3852-E
Sealing: NBR
Permissible temperature: 0…+80 °C
Output signal: 4…20 mA, 2-Leiter
Power supply: 8…30 VDC
Accuracy at room temperature: < ±1 % of span (optionally < ±0,5 % of span)
Electrical connection: Angular connector DIN EN 175301-803 A, ingress protection IP 65,
wire cross-section up to max. 1.5 mm², cable diameter: 6…8 mm

Technical Data

Wetted parts: 316L
Housing: 316L
Non-linearity: 0,5 BFSL
Parameter: bar
Type of pressure:: relative, absolute, vacuum
Measuring range: 0…16 bar, 32 bar overpressure limit
Process connections: G 1/4A according to DIN 3852-E
Sealing: NBR
Permissible temperature: 0…+80 °C
Output signal: 4…20 mA, 2-Leiter
Power supply: 8…30 VDC
Accuracy at room temperature: < ±1 % of span (optionally < ±0,5 % of span)
Electrical connection: Angular connector DIN EN 175301-803 A, ingress protection IP 65, wire cross-section up to max. 1.5 mm², cable diameter: 6…8 mm max. 50 Nm