Introduction
Factair’s Safe-Air Testers make accurate air quality testing to the requirements of EN12021 and a range of international standards even easier to complete. In the UK this ensures compliance with the mandatory requirements of COSHH L5.
Instruments are available in portable and continuous monitoring formats. The latest generation utilise electronic cells to test carbon dioxide, carbon monoxide and oxygen with a PID sensor for volatile organic compounds which can include oil vapours and a test port for oil mist using the Draeger Impactor. Moisture is automatically measured with a built-in electronic dewpoint meter and there are digital readings for pressure, flow rate and ambient temperature.
The continuous monitoring instruments utilise similar detection technologies to the portable units but also include a range of alarm output options as well as SMS alarm and sensor reading updates. These instruments can also be connected to display, datalog and alarm on readings from external instruments.
Factair F8000 Safe Air Tester Instrument Explanation
The Factair F8000 Safe Air Tester most advanced portable breathing–air quality monitoring instrument. With a 7”touch screen color display the instrument has been designed for ease of use making it easy to verify the quality of breathing–air systems against a range of international standards including EN12021, CGA G–7.1–2011 grade D and AS–NZS 1715:2009.
The instrument incorporates electronic sensors for carbon monoxide, carbon dioxide and oxygen. Levels of volatile organic compounds (VOCs) are tested with a PID sensor and a sample test point allows you to test for the presence of oil aerosols using a Dräger Impactor.
An electronic dew point meter measures moisture content. Test results are saved in the instrument’s memory and can then be downloaded, to PC software provided with the instrument.
Powered by either internal rechargeable batteries or direct from a mains power supply the F8000 also has a test mode for continuous live sensor readings with data logging.
Factair F8000 Safe Air Tester Quality
Factair’s Safe-Air Testers make accurate air quality testing to the requirements of EN12021 and a range of international standards even easier to complete. In the UK this ensures compliance with the mandatory requirements of COSHH L5.
Instruments are available in portable and continuous monitoring formats. The latest generation utilize electronic cells to test carbon dioxide, carbon monoxide and oxygen with a PID sensor for volatile organic compounds which can include oil vapours and a test port for oil mist using the Draeger Impactor. Moisture is automatically measured with a built-in electronic dewpoint meter and there are digital readings for pressure, flow rate and ambient temperature.
The continuous monitoring instruments utilized similar detection technologies to the portable units but also include a range of alarm output options as well as SMS alarm and sensor reading updates. These instruments can also be connected to display, data logger and alarm on readings from external instruments.
TECHNICAL DATA
| SENSORS | RANGE | TYPE |
| O2 | 0-25% | Electrochemical |
| CO | 0-20 PPM | Electrochemical |
| CO2 | 0-2000 PPM | Non-Dispersive Infrared |
| VOCs | 0-40 PPM | Photoionisation Detector (PID) |
| Moisture | -100°C to +20°C | Ceramic Moisture Sensor Dewpoint Meter |
| Pressure Dewpoint | ||
| Test Port | Impactor for oil aerosols and Dräger detector tubes | |
| Connectivity | Individual test results and continuous data logging files can be downloaded via a USB A to B cable provided with the instrument | |
Source: factair.co.uk
Another Article :
