Solar LED Light Controller

Description

Solar LED Light Controller includes a constant current driver function, which can lower the cost of the whole system. Easy installation and cost saving. When installing, do not need to set up complex lines, just make a cement base, make a battery pit, and fix it with galvanized bolts. No need to consume a lot of manpower, material resources, or financial resources.

The solar controller is used in the solar photovoltaic system. It is called the solar charge and discharge controller and coordinates the work of solar panels, batteries, and loads. It is a very important component in the photovoltaic system. Make the entire solar photovoltaic system efficient and safe.

The Products of Solar LED Light Controller

3.2V Solar Charge Controller

This series of PWM solar controllers is designed for recycled batteries that are obtained from vehicles. These batteries can not work as a normal 12V or 24V lithium battery, so we just take 1 cell battery to design a new solar street light system. Smart-3.2v solar charge controllers can support max.

Features

• This series of PWM solar controllers is designed for recycling batteries that are obtained from vehicles. These batteries can not work as a normal 12V or 24V lithium battery, so we just take 1 cell battery to design a new solar street light system.
• Smart-3.2v solar charge controllers can support a 30W LED. This battery pack is small enough to be put into the street lamp easily.
• Constant current output, the current can be set by the remote control
• 5 stages timer and dimming set
• 365 mode, can realize lighting for a whole year without darkness
• Auto sleeping mode during transport
• Battery protection voltage can be set
• IP67, aluminum case design
• Maximum setpoint voltage limit
• Very cold batteries combined with high charge voltage setpoints can produce voltages high enough to disrupt or damage other equipment connected to the battery. To minimize possible damage a maximum voltage setpoint limit feature is provided.
• The factory defaults can be adjustable using software. Regardless of what setpoint values result from temperature compensation, the Solar Charge Controller will never attempt to apply a charge voltage greater than the maximum voltage setpoint limit value.

Lithium Solar Controller

SMR1006-DCN5XLi is a sort of lithium solar controller. It is fit for 12V/24V automatic recognition, 10A maximum charging current, and 40/60W maximum load power. Smart-DCLi is improved on the basis of Smart-DC, increasing the special circuit for lithium battery and software control.

Features

• Smart-DCLi is improved on the basis of Smart-DC, increases the special circuit for lithium battery and software control, suitable for various lithium batteries solar street light systems.
• SMR1006-DCN5XLi lithium solar controller uses MPPT & 365 mode, which is patented technology of Skywise.
• MPPT & 365 mode can greatly improve the utilization ratio of solar modules and lithium batteries in the system, with the most reasonable system matching, to achieve the requirements of high brightness and highlight rate, effectively prolong the lighting time in rainy days, reduce resource consumption, protect the environment and reduce costs.

LED PWM Light Solar Controller

This model has been in the market for one year, it debuted in April 2018. This solar charge controller is a small size but powerful function product.They are only used in solar lighting so the lamp must have been a built-in driver. Talk to battery type, suit for lithium battery 3.2V

Features

• This solar charge controller is a small size but powerful function product. They are only used in solar lighting so the lamp must have been a built-in driver. Talk to battery type, suit for lithium battery 3.2V or 6.4V, and if one led bead is 2.9~3.4V, current is 300mA, and power is 1W, then it suits for max 10pcs beads in series connection and 6pcs in parallel connection. so the battery voltage maximum 32V, lamp current is max 2.0A.
• Lamp power is 1W~20W. When there is a single cell, the panel open circuit voltage is 7V, while with two cells in a series connection, the panel voltage is 15V. By the way, the charging target and charging recovery voltage can be set according to customers’ requirements.
• Another function of is street light solar controller is shipping mode, as the lithium solar controller usually is integrated with a battery in the lithium battery pack for shipping,it will waste electronic and increase transport risk. we develop this function, the light has no output, then the power consumption is reduced by 60%, so that the battery voltage will not be too low.
• As soon as this model was developed it became the best seller, now in the domestic, its sales account for 70% of total sales of LED light solar controllers.In the global market, some customers from Southeast Asia bought this model.

Waterproof Solar Controller With Microwave Induction

MPPT0850-DCLiV is the newly developed lithium-ion MPPT boost constant current waterproof solar controller with microwave induction. Microwave sensors, also known as microwave radars, are instruments that use the Doppler principle of electromagnetic waves.

Features

• MPPT0850-DCLiV is the newly developed lithium-ion MPPT boost constant current waterproof solar controller with microwave induction.
• Microwave sensors, also known as microwave radars, are instruments that use the Doppler principle of electromagnetic waves.
• The basic working principle: any wave has the characteristic of reflection. When a wave of a certain frequency hits the obstacle, a part of the wave will be reflected back.
• If the obstacle is stationary, the wavelength of the reflected wave is constant. If the barrier moves toward the wave source, the wavelength of the reflected wave is shorter than the wavelength of the wave source.
• If the barrier moves away from the wave source, the wavelength of the reflected wave is longer than the wavelength of the wave source, and the change in wavelength means A change in frequency. Microwave induction knows that moving objects are approaching or moving away by changes in reflected waves.

10a MPPT Solar Charge Controller

MPPT1050-DCLi is a sort of 10a MPPT solar charge controller. It means 12V/24V automatic recognition, 10A maximum charging current, and 60/120W maximum load power. MPPT-DC series 10a MPPT solar charge controller realizes the perfect combination of MPPT charging and a built-in LED driver.

Features

• MPPT-DC series 10a MPPT solar charge controller realizes the perfect combination of MPPT charging and built-in LED driver. Excellent choice on components, as well as meticulous R&D design, due to which provides users with a classic product.
• General characteristics of boost mode solar charge controller:
• Can output constant current (can be set). Accuracy: 50mA, Min current: 100mA
• 5 stages time and dimming can be adjusted, dimming 0~100%
• Can read parameters and running status
• If battery voltage is low, it can be set to dimming automatically
• Dimming start voltage and dimming percentage can be set
• Day/Night threshold can be adjusted automatically
• Remote Unit to configure, with LCD display

Read More Articles :

• Telemecanique Sensors-Related Technology
• Pneumatrol – Electro Pneumatic
• Solar Charge Controller
• BASI Instrument AB – Process Instrumentation
• Zebra Skimmers Accessories