APG MPI-F Flexible Magnetostrictive Float Level Transmitter

APG MPI-F Flexible Magnetostrictive Float Level Transmitter

APG MPI-F Flexible Magnetostrictive Float Level Transmitter features a 316L SS flexible tubing braided stem that uncoils easily for simple installation in tall tanks. The MPI Series Intrinsically Safe Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications.

The MPI-R’s large, buoyant, and robust float allows for use in harsh applications where fouling or buildup might otherwise be of concern. The MPI-E’s lighter weight design allows it to be used in applications where space is limited. The MPI-E Chemical has a chemical resistant coating, allowing for use in corrosive, acidic, or marine environments.

The MPI-F’s flexible stainless steel stem allows for installation in tall tanks without needing a crane, and the MPI-T’s 1” titanium stem provides compatibility in a wider range of corrosive media–including H2S–in larger tanks. The MPI-F does everything you expect from an MPI, but with more flexibility. Its 316L SS flexible tubing with braided stem simplifies installation in tall tanks without compromising its Class I, Div 1 Intrinsically Safe rating.

APG MPI-F Flexible Magnetostrictive Features

  • Class I, Division 1, and Class I, Zone 0 Hazardous Location Rating (cCSAus, ATEX, IECEx)
  • Highly accurate and repeatable readings
  • RS-485 (Modbus RTU) output
  • Rugged and reliable, lengths up to 25 feet (7.62 m)
  • Dual level (interface) measurement

APG Float Level Transmitter Modbus Output

The RS-485 Modbus RTU output makes the MPI compatible with any Modbus controller or PLC. The MPI can also be paired with an MDI to create a self-contained, Intrinsically Safe level measurement system.

Tank Cloud Compatible

The MPI liquid level sensor is a Tank Cloud slave sensor, able to communicate via the Internet with the addition of an LOE Master sensor or an RST-5003 module.

APG Float Level Transmitter  Flexible

The MPI-F is designed with ease of use in mind. The 316 SS flexible tubing stem coils for compact shipping, and with the stem weight attached, uncoils easily into your tank, so you no longer need an 40-foot crane to install a 20-foot probe in a 20-foot tank.

Application

  • C I, D 1 Hazardous Locations
  • C I, Z 0 Hazardous Locations
  • Tall Storage Tanks
  • Oil/Water Interface Measurement
  • Biotech
  • Oil and Gas
  • Petrochemical
  • Chemical

Another Article:

APG MPI-F Flexible Magnetostrictive Specification

Performance

Accuracy Greater of ±0.04 in. (±1mm) or 0.05% of full range
Resolution Modbus: ±0.04 in. (±1mm)

Electrical

Supply Voltage 8-24 VDC
Typical Current Draw Modbus: 25 mA
Protection Reverse polarity
EMI/Surge (IEC 61000-4-5, 4-6, 4-7)

Physical

Housing Cast aluminum, epoxy coated
Stem 7/8” ø Flexible Tubing with Braid, 316L SS
Stem Length 4 – 25 ft. (1.22 – 7.62 m)

Download Data Sheet: Intrinsically Safe Flexible Magnetostrictive Float Level Transmitter MPI-F

Ref: apgsensors.com

Share