Hengesbach NKS 13 Conductive Level Sensor

Hengesbach NKS 13 Conductive Level Sensors are mainly used to detect conductive threshold levels in liquids such as fruit juices, beer, milk, etc. with a minimum conductivity of 5 µS. The design and the corresponding welding socket ensure that the sensor is easy to clean for use in the food and pharmaceutical industry, etc.

CIP- and SIP-suitability are guaranteed. The non-corrosive materials used for the rod and the insulation, as well as the diameter of the rod, render the sensor suitable for use in corrosive media and high-vibration environments. The sensor can be shortened, which has a positive and practical effect on storage. The electrode is coated with HALAR, which means that the threshold level detection is also suitable for foaming media.  The level modules for installation in the head can be directly connected to the SPS.

Hengesbach NKS 13 Conductive Level Sensor Features:

  • conductive threshold level detection in liquid media
  • installation version with o-ring seal for the gea-tuchenhagen welding socket system
  • stainless steel housing IP69K
  • maintenance-free, electrodes can be shortened
  • option:  with level module nm or NC1

Hengesbach NKS 13 Conductive Level Sensor Specification:

Electrical connectioncable connection M16x1.5
bipolar terminal (2.5 mm²)
optional: M12x1 connection plug
Type of protectionIP 67 according to EN 60529
Process connectionG ¾ B with union nut and O-ring 11×4, EPDM for welding socket 1.4571
Electrode length200, 500, 800, 1500 mm, can be shortened, other lengths on request
Operating temperaturemax. 140 ºC
Environmental temperature-10…+60 ºC
Operating pressuremax. 6 bar
Sensor rodD = 11 mm
CoatingECTFE (HALAR), ø 0.7 mm, FDA approved

Download Data Sheet: Conductive Level Sensor Type NKS 13

Ref: Hengesbach.com

Other Article:

Similar Posts