Magnetrol Echotel 940/941 Ultrasonic Level Switch are compact integral units that utilize pulsed signal technology to perform high or low level measurement in a wide variety of liquid applications. These switches feature a 316 stainless steel tip-sensitive transducer that is offered in a variety of NPT, flanged, and hygienic process connections. The compact electronics are completely encapsulated just above the process fitting. The Magnetrol ยฎ Model 940 offers a 1-amp SPDT relay output. The Model 941 has a mA current shift output.
Magnetrol Echotel 940/941 Features
- Pulsed electronics for excellent performance in difficult process conditions and superior immunity from sources of electromagnetic noise
- Tip-sensitive transducer gap provides reliable operation by draining viscous liquids and shedding foam in turbulent applications
- Safety Integrity Level (SIL) data (FMEDA analysis) is available. Model 940 is suitable for SIL 2 loops. Model 941 is suitable for SIL 1 loops.
- Extremely compact unit is easily installed in areas where access space is limited
- 1-amp SPDT relay output (940), or mA current shift (941) output
- No calibration required
Magnetrol Echotel 940/941 Applications
The Model 940/941 can be applied in a wide variety of high or low liquid level applications, pump protection, and fill line monitoring as shown in the diagram at the left. These compact units can also be installed in the interstitial space between two tank walls for fluid leak detection. Small size and simplicity of installation make these units ideal for OEM skids as a low cost, yet high performance level measurement solution. They are also the perfect replacement for older floats, conductivity switches, and tuning forks
Specifications
| Electrical: | |||||
| Power Supply: | 12โ35 VDC | ||||
| Power Consumption: | Less than 1 Watt | ||||
| Signal Output: | Model 940: | SPDT relay, 1 amp @ 30 VDC, 0.5 amp @ 125 VDC, 0.5 amp @ 150 VAC | |||
| Model 941: | Dry Gap: 8 mA (ยฑ1 mA), Wet Gap: 16 mA (ยฑ1 mA) | ||||
| Cabling: | 18โณ (457 mm) flying leads of 18 AWG wires | ||||
| Repeatability: | 0.078โณ (2 millimeters) | ||||
| Response Time: | 1?2 second typical | ||||
| Environmental: | |||||
| Ambient Temperature: | -40 to +185 ยฐF (-40 to +85 ยฐC) | ||||
| Process Temperature: | -40 to +185 ยฐF (-40 to +85 ยฐC) | ||||
| Maximum Pressure: | 2000 psig (138 bar) for 1โณ (3 cm) NPT and 2โณ (5 cm) BSP transducers | ||||
| 1500 psig (103 bar) for longer transducers | |||||
| Shock | ANSI/ISA-S71.03 Class SA1 | ||||
| Vibration | ANSI/ISA-S71.03 Class VC2 | ||||
Download Datasheet: Magnetrol Echotel ยฎ Model 940/941 Ultrasonic Level Switch
Reference: magnetrol.com
Another Article:
- Magnetrol Echotelยฎ 910 Ultrasonic Level Switch
- Magnetrol E3 Modulevelยฎ Liquid Level Transmitter
- Pulsar Continuous Level and Volume Measurement
- Hengesbach Level Module for Installation in Level Probes Type NM
- Industrial Controller MCU 200 Series
