Bamo MAXIMAT TC1 is a signaling unit for overfill and leakage detectors MAXIMAT (X series) and MAXITOP. The detector is powered directly by TC1 unit. The built-in buzzer provides local alarm to the operator, and the LEDs inform visually about the alarm status. The audible alarm is acknowledged through the push-button on the right side.
Bamo MAXIMAT TC1 Features
- Alarm unit, 1 channel, for: MAXIMAT CX & and MAXITOP series, overfill and leak detectors
- Optical and acoustic alarms (> 75 dB)
- Diagnostic of detection loop
- Relay output, changeover contact
- Robust and inexpensive
Application
Alarm signaling device for
- Containers for storage of liquids, in safe area
- Retention basins, piping
- Tanks and collecting basins
Bamo MAXIMAT TC1 Specification
Power supply | 230 V AC ±10 %; 50/60 Hz; 24 V DC |
Consumption | About 2 VA / 2 W |
Protection | IP 65 according EN 60 529 |
Temperature | -20 … +60 °C |
Connections | Screw terminals |
Indications | Green LED for “operating system” |
Red LED for ”alarm in progress” | |
Yellow LED for “alarm not yet acknowledged” | |
Integrated audible alarm; can be disabled | |
Output relay | Max. 230 V AC / 3 A; potential free changeover contact |
Housing | Polycarbonate, 120x80x55 mm; for wall mounting |
Download Data Sheet: Level 1 Channel Alarm Unit MAXIMAT TC1
Ref: bamo.eu
Another Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor