Description
The Bamo bamo radar level transmitter Pilotrek is a radar level transmitter without contact with the liquid, with protected electronic module integrated in the housing. Compact, this device powered by the 4-20 mA loop is distinguished by its reliability and accuracy. Located above the liquid surface, it provides an analogue signal proportional to the level of the liquid.
The measurement is not affected by changes of operating temperature and pressure. The radar operates at a frequency of 25 GHz (K band). Compared to radars operating at low frequency (5-12 GHz), the antenna size, the dead zone and the measurement angle are reduced.
Features
- Measuring range: 0.2 to 23 m
- Without contact with the fluid
- 4-20 mA loop power supply
- IP 68 compact housing
- Antenna: AISI 316 Ti or Polypropylene
- Cable output
Application
The Bamo radar level transmitter PILOTREK is an accurate level transmitter of liquids, slurries, emulsions and other chemicals in many fields of application such as: Food, energy, pharmaceutical, chemical industries and even in shipbuilding.
PILOTREK bamo radar level transmitter provides a contact-free measurement for those substances which create vapors and is convenient as well as for vacuum applications.
Specification
| Measurement | Level, Distance; Volume |
| Signal frequency | About 25 GHz (K-band) |
| Measuring range | From 0.2 to 23 m according antenna type ? See § ”Maximum measurement distance” |
| Linearity error | < 0.5 m: ±25 mm |
| 0.5 to 1 m: ±15 mm | |
| 1 to 1.5 m: ±10 mm | |
| 1.5 to 8 m: ±3 mm | |
| > 8 m: ±0.04% of measured distance | |
| Measuring angle | Max. 19° (Antenna ND 40) |
| Liquid: Minimum ?r | 01.09 |
| Resolution | 1 mm |
| Temperature incidence | 0.05 % F.S. / 10 °C |
| Power supply | 20 … 36 V DC |
| Output signal | 4-20 mA + HART® |
| Display (optional) | Display unit MULTICONT |
| Signal damping | From 0 to 99 s |
| Measuring frequency | 10 … 60 s according the application |
| Probe material | Polypropylene (PP) |
| Antenna material | AISI 316 Ti (1.4571) |
| Fluid temperature limits: | -30 … +100 °C; Max. 80 °C with PP enclosure |
| Ambient temperature limits | -20 … +60 °C |
| Operating pressures | Max. 25 bar; Max. 3 bar with PP enclosure |
| Fitting | BSP |
| Protection | IP 68 |
| Cable output | Cable LiYCY; 2×0.5 mm² (AWG20) |
| shielded Ø 6 mm | |
| Standard length: 5 m; other length on request, Max. 30 m | |
| Electrical protection | Class III |
| Sealing | FPM, EPDM |
| Mass | Max. 1.6 kg |
Download Data Sheet: IP 68 Radar Level Transmitter PILOTREK – IP 68
Ref: bamo.eu
Other Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor
You must be logged in to post a comment.