Bamo Level Electric Gauge JE100

Level Electric Gauge JE100
Level Electric Gauge JE100

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Level Electric Gauge JE100

Under the thrust of the fluid, the float transmits the level through an angle drive to a vertical stem. The stem is then actuating a potentiometer (resistive output) and/or actuates contacts (alarms). The electric gauge is mounted above the tank. The complete system is supplied ready to install and to use.


  • Tank height from 1250 to 3000 mm
  • Transmission: angle drive
  • Fitting: male 2” BSP
  • Head housing: IP67
  • 2 possible functions:
    • With 1 or 2 contacts, potential free
    • With continuous resistive signal (Ω)


These controllers for alarms on low, high levels, and transmitters of continuous level, are designed for indoor or outdoor tanks.

Liquid storage examples

  • Diesel – Lubricating oil
  • Glycol water
  • Rainwater

They are particularly well adapted to use and needs of storage or day-tank on diesel generators located outdoor

Another Article:


Materials Steel, Nylon
Float: Foamed PVC
On request: Stainless steel (316L)
Flange seal: Cork gasket
Mounting BSP 2”, male fitting
Head housing Nylon, IP67
1 pressure gland 13 mm
Pressure Atmospheric
Temperature Between 0 and 40 °C
Contacts Default setting:
1 or 2 contacts (2 way contact), 10 A, 230 V, potential
HIGH level alarm: 90 %
LOW level alarm : 25 %
On request: Factory adjustment between 20 and 90 %.
Continuous signal output Resistive signal
From 0 to 215 Ω (approx., ±15 %)

Download Data Sheet: Level Electric Gauge JE100