Bamo STE Resistive Level Probe in combination with a relay ES2001 detect the level of electrically conductive liquids. According to the model, up to 5 levels may be triggered (using the tank as the reference electrode) Provide a reference electrode if the tank is made of insulating material.
These STE probes are not suitable for liquids with hydrocarbons or grease or for any other application where an insulating layer may deposit on the electrodes.
Bamo STE Resistive Level Probe Features
- For level control
- Applications with conductive liquids
- 1 to 5 Detection electrodes
- Level regulation with relays ES2001
Application
- Level control in open or closed vessels
- Alarm for excess or lack of liquid (leak detection, empty piping, dry-pump prevention, etc.)
- Fill or drain function with ES 2001 relay
Bamo STE Resistive Level Probe Specification
Electrodes | Up to 5 rods, AISI 316 L (Titanium in option) | |
Fitting | PP or AISI 316 | |
Head housing | PBT glass fiber reinforced, | |
IP 65 (EN 60 529), cable gland M20 x 1 | ||
Option: Partial insulation | Polyolefin (heat schrinkable) | |
To avoid false alarms by conductive bridge through the medium between electrodes or if the electrodes are long and can touch each others. | ||
Temperature limits | Ambient: -20 … +60 °C | |
Liquid: -5 … +100 °C (restrictions apply according the chemical) | ||
| 6 bar at +20 °C | |
1 bar at 100 °C | ||
Other pressure limits: On request | ||
Min. L1 & L2 | 45 mm | |
Max. L1 … L5 | 2000 mm | |
Installation | Vertical on top of tank; Never install horizontally |
Download Data Sheet: Resistive Level Probe STE
Ref: bamo.eu
other Article:
- APG RPM Explosion Proof Resistive Float Level Transmitter
- Bamo Resistive Level Controller ES 2001
- Bamo Cable Suspended Resistive Level Probes
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor