Delta Mobrey MSP900SH and MSP900SH Flow TransmitterIndonesia Industrial Parts

Delta Mobrey MSP900SH and MSP900SH are based on ultrasonic technology. Ultrasonic pulse signals are transmitted and reflected from the liquid surface. The transmitter ‘listens’ for reflected signals (echoes) and measures the time-delay between transmitting and receiving. The distance to the liquid surface is automatically calculated using the computed time-delay. The MSP900SH has an integrated sensor for automatically compensating the Distance for temperature effects.

The MSP900FH has a factory fitted remote temperature sensor to continuously measure the air temperature around the transmitter. It then computes the speed of sound in air, automatically compensating Distance for temperature effects. The level measurement (Bottom Reference minus Distance) is sent through the 4–20 mA and HART output. Mobrey Ultrasonic Level and Flow Transmitters are your cost-effective solution for reliable level measurement instrumentation. The Mobrey MSP900SH is ideal for enclosed wet wells and sumps. The MSP900FH is ideal for open channel flow applications. Both are fully encapsulated to withstand accidental submersion.

Delta Mobrey MSP900SH and MSP900SH Advantages:

Eliminates problems experienced with contacting instrumentation
Simple set-up and operation
Minimal maintenance after installed
Low cost of installation and commissioning
Process downtime minimized
Non-contacting measurement with no moving parts
Sealed rugged UPVC housing
Corrosion resistant UPVC wetted material
Factory fitted with up to 164 ft. (50 m) of two-core cable
4–20 mA loop-powered
Operating range to 39 ft. (12 m)
Measures liquid height, distance to liquid, volume, or flow in open channels
Certified Intrinsically Safe and used for level (or distance) measurements in hazardous areas
Automatic temperature compensation

Application:

Storage tank levels, open channel flow, effluent pits, reservoir level, buffer tanks, and more

Delta Mobrey MSP900SH and MSP900SH Specification:

Output Signal: Analog 4-20 mA, HART
Process Connection: 1-in. NPT or 1-in. BSPP threaded connection options
Process Wetted Material: UPVC (stabilized)
Housing Material: UPVC (stabilized)
Operating Temperature: “-40 to 140 °F (-40 to 60 °C)”
Operating Pressure: -4 to 44 psi (-0.25 to 3.0 bar)
Compatible Devices: Mobrey MCU900 Series Universal Control Unit or field communicator
Cable Glands:
- “10, 65, or 164 ft. (3, 20, or 50 m), factory fitted PVC cable.
- Ingress protection rating is IP68 to 33 ft. (10 m).”
Power Supply: “12 to 40 Vdc (non-hazardous or unclassified area). 12 to 30 Vdc (hazardous or classified area).”
Measurement range:
- MSP900SH 39 ft (12m)
- MSP900FH 11 ft (3.3m)