Bamo BR Metallic Flow Controller controls the flow-rate in a vertical pipe with ascending flow; the Liquid must be free of particles. These blind-type controllers accept high operating pressures. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.
The setting of the trigger point is possible over the entire measuring range. The actual flow-rate can be greater than the high range without damaging the device (it results in a higher pressure drop). These controllers must be installed far from any magnetic induction.
Bamo BR Metallic Flow Controller Features :
- Vertical mounting
- 1 adjustable contact
- Material: stainless steel or brass
- Pressure limit: up to 300 bar
- Flow ranges within 0.1 … 50 l/min
Control of flow in cooling, lubricating piping systems, or in any compatible skids.
Bamo BR Metallic Flow Controller Specification:
|Temperature limits||-20 … +100 °C (On request: 160 °C)|
|Flow Ranges||l/min (of water at 20 °C)|
|Contact type||N.O. (without flow)|
|Protection||Contact: IP 65|
|Connection||DIN 43650 plug-in socket, cable gland PE 9|
|Pressure limit||200 bar|
|Seals||NBR (On request: FPM or EPDM)|
|Stainless steel version|
|Pressure limit||300 bar|
|Body||AISI 316 Ti (1.4571)|
|Fittings||AISI 316 Ti (1.4571)|
|Diver||AISI 316 Ti (1.4571)|
|Seals||FPM (On request: NBR or EPDM)|
Download Data Sheet: Metallic Flow Controller BR