Bamo CDP-P Paddle Flow Controller

Bamo CDP-P Paddle Flow Controller is a pallet mounted perpendicular to the flow, actuates a changeover switch. The threshold ranges listed are for water at 20 ° C with horizontal pipe. Mounting could be on a vertical pipe with ascending flow; Then, threshold value will be greater than the one of table. The pipe slope of a flowing down piping must be less than 40 %.

Bamo CDP-P Paddle Flow Controller Features:

  • For clear liquids
  • Body in PPO, paddle in polypropylene
  • For pipes ND 25 up to ND 65
  • Mounting: On tee, or on-line with BSP ½” thread


The CDP-P is designed to control a flow-rate in water piping.

Another Article:

Bamo CDP-P Paddle Flow Controller Specification:

Materials Body and fitting: PPO glass fiber reinforced; Seal: NBR
Paddle: PP; Seal: Santoprene
(Chemical resistance to Ozone; Other many disinfectants for
water: On request)
Fitting BSP ½”
Torque 7 N.m
Piping From ND 25 up to ND 65
Temperature limits Liquid: +5 … +80 °C
Ambient: +5 … +50 °C
Pressure limit 1 MPa (PN 10) at 20 °C
Contact Reed contact: N.O. without flow
Switching power 3A/250VAC
Trigger point See table, listed values ± 30 %
Connection Cable (max. 50 °C): 3 0.75 mm²; Length: 2 m
Protection IP 65

Download Data Sheet: Paddle Flow Controller CDP-P