EGE SC 440 Thermodynamic Flow SensorIndonesia Industrial Parts

Description

EGE SC 440 Thermodynamic Flow Sensor is a liquid flow controller which operates on the thermodynamic principle available with a ¼” or ½” BSP or ½” NPT connection. When used with water the SC440 flow switch has a detection range of 1 to 150 centimeters per second (cm/s), when used with oils this is 3 to 300 cm/s. SC440 liquid flow controllers have typical start-up times of 2 to 15 seconds and a reaction time of 1 to 13 seconds.

Maximum pressure ratings are up to 100 bar. The current flow rate of the process can be seen on the local LED array on the airflow controller. The power supply is 24 VDC and every SC440 flow controller has IP67 protection class and is housed all in stainless steel. Various sensor lengths are available and the electrical connection is via an M12 connector.

The Functions of EGE SC 440 Thermodynamic Flow Sensor

The function of the flow controller is based on the thermodynamic principle. The sensor is heated internally at a few degrees C compared to the medium into which it projects. When the medium flows, the heat generated in the sensor is conducted away by the medium, i. e. the sensor cools down. The temperature within the sensor is measured and compared to the temperature of the medium. The state of flow can be derived for each medium by the temperature difference attained.

Area of application for flow monitors

Cooling water
Cooling lubricants
Metal processing (cooling on rolling mills)
Pump run dry protection
Filter monitoring
Monitoring of process flows
CIP/SIP processes

EGE SC 440 Thermodynamic Flow Sensor Specification

Design	G1/4	G1/2				NPT1/2
Detection range	water: 1…150 cm/s
Detection range	oil: 3…300 cm/s
Sensor length L	25 mm	31 mm	48 mm	80 mm	120 mm	40 mm
Thread	G1/4	G1/2	G1/2	G1/2	G1/2	NPT1/2
ID-No.	P11064*	P10521*	P10523*	P10525*	P11064*	P11064*
Type	SC440/5-A4-GSP	SC440-A4-GSP	SC440/1-A4-GSP	SC440/5-A4-GSP	SC440/3-A4-GSP	SC440/6-A4-GSP
Supply voltage	24 V DC ±20%
Current consumption	70 mA
Switching current	400 mA (20°C)
Ambient temperature	-20…+80°C
Medium temperature	-20…+80°C
Temperature gradient	250 K/min
Start-up time typ.	8 (2…15) s
Reaction time typ.	2 (1…13) s
Compressive strength	100 bar
Sensor material	AISI 316 Ti • different materials on request
Housing material	AISI 316 Ti / AISI 303
Display flow	LED-array
Protection	IP 67 (EN 60529)
Connection	M12 Connector