Overview
Flux FMJ 100 Flow Meter work on the nutating disc principle. Here, the liquid flow actuates the nutating disc. With a Reed sensor the number of rotations is counted and forwarded as an impulse or passed on to the evaluation unit FLUXTRONIC®. This calculates the flow quantity of the fluid based on the previously entered, medium dependent calibrating constant.
Flux FMJ 100 Flow Meter Features:
- Nutating disc principle
- For low viscosity media
- High measuring accuracy
- Easy calibration
- Reliable operation
- No mains connections required
- Signal transmission to evaluation unit FLUXTRONIC® or external control unit such as PLC possible
- Version also available for hazardous area
Advantages:
- Insensitive to small solids
- Easy Handling
- Easy assembly on pump
- Also for non-lubricating media
- Battery acid, formic acid, ammonia, formic acid, boric acid, brake fluid, calcium chloride, ferric-III-chloride, photo developers, glycole, mineral oil, sodium hydroxide, phosphoric acid, hydrochloric acid, sulfuric acid to 60 %, tartaric acid, zinc chloride, citric acid
Specification:
- Flow rate: min. 10 l/min – max. 100 l/min
- Filling accuracy: +/- 1 %
- Operating pressure: max. 4 bar
- Size of solids: max. 1,5 mm
- Viscosity: min. 1 mPas – max. 2500 mPas
- Housing Materials:
- Media / Fluids:
- Protection class: IP 54
- Application area: For manual filling
- Measurement error of the flow rate: +/- 1 %
Download Data Sheet: Flow Meter FMJ 100 Series
Ref: flux-pumps.com
Other Article:
- Flux Flow Meter FMT 120
- Flux Pump Kits For Acids
- FLUXTRONIC Flux Flow Meter
- Flux Drum Pump for Mixing and/or Pumping F 426
- Flow Meters FMC 250 Series Flux