Flux FMO 140 Flow Meter

Flux FMO 140 Flow Meter built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode, it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier.  This way e.g. motor and / or magnetic valve and the most different processes can be controlled.

The flow meters FMO consist of a measuring chamber with oval rotors. The fluid runs through the measuring chamber and thus drives the oval rotors. With a REED sensor the number of rotations is counted and passed to the external FLUXTRONIC®. This calculates the flow quantity of the fluid on the basis of a previously given, medium-dependent calibration constant.

The FMO 140 oval rotor flow meter is suitable for use with thin to highly viscous, clean liquids. With the FLUXTRONIC®, batching and dosing a wide variety of liquids can be performed with a high degree of accuracy and safety. In automatic mode it is possible to batch and meter.  For example, when paired with the FAE hand nozzle and FSV amplifier, one-touch batching with automatic shutoff is possible.

Flux FMO 140 Flow Meter Features:

  • Oval rotor design
  • For thin to highly viscous pure media
  • Available with  integrated evaluation unit  FLUXTRONIC® or as impulse version
  • For the use in piping systems
  • High accuracy and repeat accuracy
  • Signal can be forwarded to FLUXTRONIC® or another external control as e.g. PLC
  • Can be displayed in liter, gallons or kilogram
  • Semi-automatic filling with a switching amplifier possible
  • Can be used for ex-applications in Zone 1

Application:

  • Oils
  • Gasoline
  • Solvents
  • Not self-lubricating media

Advantages:

  • Very precise dosing possible
  • High resistancy
  • Wide range of viscosities can be covered
  • Can also be used for pulsating volume flows
  • Low pressure loss
  • Also available in Version with FDA CFR 21

Flux FMO 140 Flow Meter Specification:

  • Flow rate: min. 9,5 l/min – max. 245 l/min
  • Filling accuracy: +/- 0,5 %
  • Operating pressure: max. 16 bar1
  • Viscosity: min. 1 mPas – max. 500.000 mPas2
  • Housing Materials: Stainless steel, Aluminium
  • Media / Fluids: Acids, Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels
  • Application areas: For stationary use in plant engineering such as e.g. pipelines
  • Protection class: IP 54

Benefits

  • Very precise dosing possible
  • High resistance
  • A wide range of viscosities can be covered
  • Can also be used for pulsating volume flows
  • Low-pressure loss
  • Also available in Version with FDA CFR 21

Technical Data

  • Flow rate: 3-59 GPM (15-227 l/min)
  • Measurement error of the flow rate < 5 cPs: +/- 1%
  • Measurement error of the flow rate > 5 cPs: +/- 0.5%
  • Operating pressure max: 232 PSI
  • Viscosity max: 500,000 cPs
  • Housing Materials: Stainless steel, Aluminium
  • Fluids: Acids Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels

Product attributes

  • Oval rotor design
  • For thin to highly viscous pure media
  • Available with  integrated evaluation unit  FLUXTRONIC® or as impulse version
  • For the use in piping systems
  • High accuracy and repeat accuracy
  • Signal can be forwarded to FLUXTRONIC® or another external control as e.g. PLC
  • Can be displayed in liter, gallons or kilogram
  • Semi-automatic filling with a switching amplifier possible
  • Can be used for ex-applications in Zone 1
  • Very precise dosing possible
  • High resistancy
  • Wide range of viscosities can be covered
  • Can also be used for pulsating volume flows
  • Low pressure loss
  • Also available in Version with FDA CFR 21

Advantages/characteristics:
Simple operating concept
All data will be maintained when replacing the battery
Four safety levels with PIN setting
Three additional outlets
For mounting on flow meters, on nozzles or e.g. on the wall
Calibration on medium possible
Shows filled quantity (normal operation)
With switching amplifier batch mode possible (automatic mode)
Ex-proofed

Flow meter FMO Flow meter FMO Advantages/characteristics: ► Oval rotor design ► For low-viscosity to high-viscosity media ► With integrated digital display unit FLUXTRONIC® or available as pulse version ► Depending on type for use with drum/eccentric worm-drive pump or for use in piping ► Flow rate of 0,04 – 380 l/min ► High accuracy and repeat accuracy ► Signal transduction at FLUXTRONIC® or other external control e. g. PCC possible ► Display in litre, gallon or kilogram possible ► Semiautomatic filling in connection with a switching amplifier possible ► For Ex-application in zone 1 (‘ Difference between the average measured values of a series of the measurements and the theoretical value (2 Bandwidth between several measurements under identical conditions * Version Reed/Reed or Hall/Hall possible

Download Data Sheet: Flow Meter FMO 140

Ref: flux-pumps.com

Another Article:

Similar Posts