Bamo TVI and MINITEV with screw terminals and cable gland (Excepted on MINITEV), Fitting: AISI 316 L with PTFE insulator(s), Electrodes: AISI 316 L, 1 to 4 electrodes (according the model) at necessary length. Electrical connection: with end tip to the terminal. A ground connection is available inside the housing IP55.
Bamo TVI and MINITEV Features
- For all electrically conductive liquids
- 1 to 4 electrodes
- Materials: Metals – PTFE
- Pressure up to 200 bar
- Temperature up to 220 °C
- Fittings or BSP or NPT
- Connection head in aluminum
Application
- Level control or regulation, on open tanks or closed tanks, piping, open channels, etc.
- Detection of presence or lack of liquid (leaks, empty piping, dry run detection for pumps).
Bamo TVI and MINITEV Specification
| Reference | TVI-1E | TVI-2E | TVI-3E | TVI-4E | MINITEV |
| Code | 541 310 | 541 420 | 541 430 | 541 440 | 541 330 |
| Number of electrodes | 1 | 2 | 3 | 4 | 1 |
| Fitting | ¾” G (Option : ½” G) | 1″ G | ?” G | ||
| Insulator | Insulator PTFE | ||||
| Length Min. | 54 mm | – | 60 mm | ||
| Length Max. | 3000 mm | 1000 mm | |||
| Temperature Max. | 220 °C | 80 °C | 220 °C | ||
| Pressure Max. (at T° Max.) | 25 bar (at 220 °C) | 25 bar (at 80 °C) | 25 bar (at 220 °C) | ||
| Pressure Max. at 20 °C | 200 bar | 50 bar | 200 bar | ||
| MATERIALS | |||||
| Head housing | Cast aluminum | (Without head housing) | |||
| Fitting | AISI 316 L | AISI 316 L | |||
| Electrode(s) | AISI 316 L | AISI 3016 L | |||
Download Data Sheet: Resistive Level Probes TVI & MINITEV
Ref: bamo. eu
Another Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor