EGE MFP Series Microwave Level MeterIndonesia Industrial Parts

The MFP level meter for continuous monitoring of various liquids allow measurement of the fill level in plastic or metal tanks of any size. The devices offer a high measurement precision. They work with numerous liquids such as water, oil or emulsions. Principle of measurement: The microwaves are “guided” along the rod – and are reflected at the surface of the medium. From this the sensor determines the fill level. No adjustment is necessary for various media.

The devices are made of aluminium and AISI 316 Ti stainless steel and are suitable for ambient temperatures between – 20 and +70 °C. Additional devices are available for monitoring highly corrosive liquids with a coated probe and non-metallic thread. The fill level meters are available in sizes between 300 and 1200 mm in length. The sensors are equipped with a G3/4 thread and are connected via an M12 plug. The display shows the fill level either in cm or percentage value. You can program additional functions such as a fixed offset value or measuring range.

Features of EGE MFP Series Microwave Level Meter

Microwave meter
Analog output or 2x PNP output
High precision
Water-based liquids (LM)
Liquids from oil to water (LP & LK)
Probe surface coated for aggressive media
Guided Microwave

Specification of EGE MFP Series Microwave Level Meter

Design	DC Analog / DC PNP • G3/4
Design	Single probe						Parallel probe		Coaxial probe
Output	4…20 mA, linear	2x PNP, programmable	4…20 mA, linear	2x PNP, programmable	4…20 mA, linear	2x PNP, programmable	4…20 mA, linear	2x PNP, programmable	4…20 mA, linear	2x PNP, programmable
ID-No.	P …..
Type-sensor length L	MFP 075 GA-LMxxx	MFP 075 GPP-LMxxx	MFP 075 GA-LMFxxx	MFP 075 GPP-LMFxxx	MFP 075K GA-LMFxxx	MFP 075 GPP-LMFxxx	MFP 075 GA-LPxxx	MFP 075 GPP-LPxxx	MFP 075 GA-LKxxx	MFP 075 GPP-LKxxx
Supply voltage	20…27 VDC
Current consumption	< 45 mA
Current output	4…20 mA	–	4…20 mA	–	4…20 mA	–	4…20 mA	–	4…20 mA	–
Load resistance RL	200…500 ?	–	200…500 ?	–	200…500 ?	–	200…500 ?	–	200…500 ?	–
Switching current	–	200 mA	–	200 mA	–	200 mA	–	200 mA	–	200 mA
Reverse protection	Yes
Precision	5 mm
Transition zone*	top: 25mm, bottom: 15mm		top: 40mm, bottom: 15mm				top: 25mm, bottom: 15mm
Ambient temperature	0…+70 °C
Medium temperature	0…+80°C
Sensitivity	?20?r						?2.3?r		?2?r
Protection	IP 67 EN 60529
Housing material	Aluminium				Aluminium, AISI 316 Ti		Aluminium
Material	AISI 316 Ti, PTFE		AISI 316 Ti, PTFE, PFA		PEEK, PFA		AISI 316 Ti, PTFE, POM
Sealing material	NBR, AFM 34, different material on request		NBR, different material on request				NBR, AFM 34, different material on request
Compressive strength	10 bar (25 °C)
Connection	M12 connector
Accessories	connecting cable SLG / SLW 3…, SLG / SLW 4…, see page 2.38 on the catalog

Depending on the installation conditions and the medium, deviations from the specified measuring accuracy can occur in this area.
** Please check the Catalog for more information

For More Information and Price: EGE MFP Series Microwave Level Meter