Description of Honda HL2000 Ultrasonic Level Meter
Honda HL2000 ultrasonic signal has the characteristic that it reflects where the density changes. The submerged sensor transmits an ultrasonic signal, and then the signal reflects at the interface inside the tank. Some parts of the signal penetrate into the sludge and it also reflects at the rake or bottom of the tank.
Ultrasonic signal transfers in the unclear water. There is no need to contact the measuring object (sludge), the measurement can be done without sinking the sensor deep into the tank.
Features of Honda HL2000 Ultrasonic Level Meter
- A wide range of distances can be measured from 0.4 to 10 m from the sensor’s transmitting surface.
- A single unit can measure two locations. (Standard equipment: 1 sensor)
- Using ultrasonic waves enables measurement without effects from transparency, or chromaticity, regardless of day and night.
- The interface is measured by processing calculations based on the assumption of changes in the quality of the upper water and sediment sludge concentration, so there is no need to change the setting values or readjust them depending on the condition of the facility.
- No driving parts in the converter and sensor, which enables stable measurement over a long period of time.
Output of Honda HL2000 Ultrasonic Level Meter
- Alarm output
- 4-20mA
- RS232C
*Transmission to a PC is possible with optional communication software.
Application of Honda HL2000 Ultrasonic Level Meter
- Interface management of settling tank at industrial wastewater treatment facility
- Interface management for a settling tank at a sewage treatment facility
Specification of Honda HL2000 Ultrasonic Level Meter
| Model | HL2000 | |
| Number of Channels | 2CH | |
| Frequency | 400kHz | |
| Object of measurement | Sludge interface | |
| Distance measurement range | 0.4?10m | |
| Resolution | Measure | 1cm |
| Display | 1cm | |
| Data updating cycle | 1 second | |
| Sensor directivity angle (sound pressure half full angle) | 6° | |
| Power | Voltage | AC100?240V?±15% |
| Power consumption | 10VA | |
| Display | LCD display (with backlight) | |
| Output | Alarm output | 2 points for each upper and lower CH AC250V, DC30V 5A (relay contact) |
| 4-20mA current output | Resolution: 16bit, 1 point per CH (Maximum load resistance 450?) | |
| Interface | RS-232C (transmission distance: within 10m) | |
| Model | Body | Sensor |
| Ambient operating temperature | -10?60? | -5?60? |
| Material | Steel coating | Case: PVC Cable: PVC |
| Structure | Equivalent to IP54 | Equivalent to IP68 |
| External dimensions (WxDxHmm) | 280?92.5?322 | ?80?95 |
| Sensor cable length | – | 20m |
| Maximum allowable sensor cable length | – | 100m? |
| Wiring cable length | Not included | – |
| Weight | 3.6kg | 2.2kg |
*Please contact us when extending the sensor cable.
For More Information and Price: Honda HL2000 Ultrasonic Level Meter
Read More Articles:
- Nivelco Microwave Radar Level Measurement
- Contrec 120A Level Monitor
- External Non-Contact Ultrasonic Level Sensor
- Omnitrol 621/721 Control Switches Lead Displacers
- ABB Magnetostrictive Level Transmitter LMT200
You must be logged in to post a comment.