Technoton DUT-E S7 Wireless Fuel Level SensorIndonesia Industrial Parts

Description of Technoton DUT-E S7 Wireless Fuel Level Sensor

DUT-E S7 wireless sensor allows measuring current fuel volume and its changes in a fuel tank. DUT-E S7 is used as a part of the vehicle telematics system (GPS vehicle tracking system) and provides reliable information on remaining fuel volume, fuel tank fill-up, and draining volumes and helps fleets to set up clear fuel accounting and prevent fuel theft from vehicle’s tank. DUT-E S7 wireless fuel level sensor is also used for fuel level monitoring in stationary tanks.

Wireless data transfer is carried out using S7 Technology via the BLE channel. BLE signal from DUT-E S7 can be received by a compatible vehicle tracking unit (telematics unit) and/or any Android or iOS device.

DUT-E S7 can also be used as a “night watchman” to alert the driver on fuel theft from the vehicle’s tank, for example, when resting at night parking.

Features of Technoton DUT-E S7 Wireless Fuel Level Sensor

Wireless data transfer using S7 Technology via BLE (Bluetooth 4.X Low Energy);
Operation in BLE-radio mode without pairing with receiver – simultaneous data transfer to telematics unit, smartphones, tablets with Bluetooth
Built-in battery – DUT-E S7 works without an external power supply;
Very low power consumption allows autonomous operation of the sensor within 5…10 years;
Explosion protection confirmed by “On the Safety of Equipment for Operation in Explosive Environment”

Application of Technoton DUT-E S7 Wireless Fuel Level Sensor

Monitoring of tank refueling and fuel draining
Fuel theft prevention
Fuel consumption monitoring

Specification of Technoton DUT-E S7 Wireless Fuel Level Sensor

Estimated lifetime of the sensor (battery life), years	5…10*
Fuel level sensor operating principle	Capacitive
Wireless data transfer interface	Bluetooth 4.X
Tx Power, dBm	+4
Rx sensitivity, dBm	-88
Maximum distance between sensor and receiver, m	10…20 (when mounted on a vehicle or inside a building) not less 50 (when mounted within line-of-sight)
Standard probe length, mm	700, 1000 (can be manufactured up to 3000 mm on request)
Data transfer interval, s	5
Number of simultaneous BLE-signal receivers	Any number in the DUT-E S7 operation range
Temperature range, °C	-30…+80