RMG TRZ 03 Turbine Gas Flow MeterIndonesia Industrial Parts

Description

The RMG TRZ03 series is an excellent representation of a proven and mature technology that is widely used throughout the natural gas industry due to its good price-performance ratio. The first generation was approved by PTB in 1993. Since then the meters have always exceeded the requirements of the relevant international standards.

The RMG TRZ03 is used both in the pipeline networks of the transport companies (TSOs) and in the transfer stations of the distribution network operators (DSOs) when high measuring accuracy for custody transfer operation, short inlet distances, robust and low-maintenance devices are required. In addition to the classic mechanical roller counter and the electrical pulse outputs, the meter can optionally be equipped with an encoder for serial transmission of the meter reading.

RMG TRZ 03 Turbine Flow Meter serves to calculate the flow rate of natural gas, butane, propane, nitrogen, air, acetylene, and other gaseous matters used in various technological processes (gas flow meter). It consists of the following components: body, measuring element (located on the body), and counting mechanism.

A flow straightener located upstream of the measuring element of RMG TRZ 03 Turbine Meter directs the gas onto the turbine blades. The turning number is proportionate to the average speed of movement of the operating environment and, therefore, to its flow.

The rotary motion generated by the turbine wheel is transmitted by a magnetic coupling to the meter head. Thereafter, the speed, which is proportional to the flow rate, is reduced by gearing and converted into the measured volume by choosing a needed pair of gear wheels. As a result, the obtained data is shown on the counting mechanism. High accuracy of measurements is ensured.

Device for Custody-transfer Metering

Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon inquiry;
Special design for aggressive gases is available;
Mechanical counter head for continuous registration and display of total volume without electrical power supply;
High measuring accuracy;
Gas may flow horizontally or vertically;
Optionally with mechanical drive shaft;
TRZ 03E without mechanical counter – with electronic connection for computers.

Apparatus for measuring the volume of gas in legal metrology

Suitable for gases according to DVGW worksheet G-260 and neutral, non-aggressive gases, other gases on request
Special design for aggressive gases is possible
Roller counter, which registers the total volume and displays it at any time without a power supply
High measuring accuracy
Horizontal or vertical gas flow
Optionally with mechanical output clutch
TRZ 03E without mechanical counter, with electronic tap for computer systems
DIN-DVGW tested and PTB approved

Spesification :

Max. admissible pressure PS 100 bar
Max. admissible pressure Pmax up to 100 bar
Meter sizes G 65 to G 16000 (from Qmax 100 m³/h to Qmax 25000 m³/h)
Measuring range max. 1: 50
Connection DIN flange PN 10, PN 16, PN 25, PN 40, PN 100 and Flanges according to ANSI 150, ANSI 300, ANSI 600 in DN 50, DN 80, DN 100, DN 150, DN 200, DN 250, DN 300, DN 400, DN 500, DN 600

Size and performance data

Meter size	Nominal diameter	Overall length	Max. Max. operating pressure	Max. Flow rate
	DN	(flange to flange)	pmax	Qmax
		in mm	in bar	in m³/h
G 65	50	150	100	100
G 100	80	240	100	160
G 160	80	240	100	250
G 160	100	300	100	250
G 250	80	240	100	400
G 250	100	300	100	400
G 400	100	300	100	650
G 400	150	450	100	650
G 650	150	450	100	1000
G 1000	150	450	100	1600
G 1000	200	600	100	1600
G 1600	200	600	100	2500
G 1600	250	750	100	2500
G 2500	250	750	100	4000
G 2500	300	900	100	4000
G 4000	300	900	100	6500
G 4000	400	1200	100	6500
G 6500	400	1200	100	10000
G 6500	500	1500	100	10000
G 10000	500	1500	100	16000
G 10000	600	1800	100	16000
G 16000	600	1800	100	25000