Alicat CODA KC–Series Coriolis Mass Flow Meter is compatible with a wide range of liquids and gases at pressures up to 4000 PSIA and full-scale flow rates from 40 g/h to 100 kg/h.
Descriptions of Alicat CODA KC–Series
- Composition independence. Coriolis technology provides high-accuracy readings even when fluid composition is changing or unknown.
- Accuracy and cost. NIST-traceable accuracy to ±0.6% of reading and repeatability to ±0.1% of reading for applications with lower accuracy requirements.
- Robust material compatibility. Available with wetted materials that are compatible with a wide range of aggressive fluids.
- Insensitivity to external vibration. Inherent resistance to external vibrations mitigates environmental process disturbances.
Specifications of Alicat CODA KC–Series Coriolis Mass Flow Meter
Standard Accuracy CODA KC–Series performance
- Available full-scale ranges: 40 g/h to 100 kg/h
- Steady-state control range: 5% – 100% of full scale
- Accuracy calibration, NIST-traceable (liquid): ±0.6% of reading or ±0.2% of full scale, whichever is greater
- Accuracy calibration, NIST-traceable (gas): ±1% of reading or ±0.2% of full scale, whichever is greater
- Repeatability: ±0.1% of full scale
- Density accuracy: ± 5 kg/m3
- Zero stability: ± 0.2% of full scale
- Typical measurement response time: < 1 s
Standard Accuracy CODA KC-Series operating conditions
- Operating temperature: –35 to 70°C (fluid); 0 to 60°C (ambient); consult Alicat for additional options
- Proof pressure: 1500 PSIA for most units; optional 4000 PSIA for ?100 g/h
Device Range and Performance
Full scale flow rates range from 40 g/h to 100 kg/h with controllable ranges of 2% to 100% of full scale.
- To learn about additional custom flow ranges, please contact Alicat.
- For specs on Coriolis controllers
Features of Alicat CODA KC–Series Coriolis Mass Flow Meter
- Communication protocols: Analog, Modbus RTU over RS-232 or RS-485, EtherNet/IP, EtherCAT, PROFINET
- Process connections: female SAE (default), male VCR, female SAE, Compression, IGS-C Seal, IDEX (1/4-20 flat bottom female)
- Display: None or external
- Wetted materials:
- Standard: 316L stainless steel and FKM
- Optional: FFKM, EPDM, PCTFE, 316L stainless steel metal seals; nickel alloy
- Ingress protection options: IP40, IP65, IP66, IP67
Source : www.alicat.com
Read More Articles :
- Alicat Standard CODA Coriolis Mass Flow Meters
- Flow Meter Coriolis mass flow untuk Crude Palm Oil
- Coriolis Mass Flow Sensor Rheonik RHM80
- Coriolis Mass Flow Meter Rheonik RHM30
- Gravity Coriolis Mass Flow meter Rheonik RHM12
You must be logged in to post a comment.