Ultrasonic Flow Meter Omega FDT500Indonesia Industrial Parts

Description

The Omega FDT500 Series comprises advanced-technology water flow meters. This series uses transit-time ultrasonic flow meter technology in which the signal is transmitted and received alternately between 2 flow sensors and the “time of flight” determines the flow rate.

The battery-powered transmitter comes in the user’s choice of an integrally mounted display or a remote mount version. Applications include both commercial and consumable water measurements. Long-term stability and a wide measurement range make it possible not only to measure water consumption but also to monitor systems for water leakage.

Because the FDT500 Series has no moving parts, the system pressure loss is minimal and filtration is not required. The display flow rate or total at the push of a button. Installation is aided by 150-lb ANSI flanges in sizes from 2 to 8″ or 32 to 200 DN.

Features

Economical Ultrasonic Flow Meter for Water Service
Battery Powered
Displays Flow Rate and Total
4 to 20 mA Current output standard (DC Power required)
Virtually No Pressure Loss
No Moving Parts for Long Life
NIST 3-Point Calibration Included
USB/RS232 (Optional)

Specifications

Type: Transit Time In Line Ultrasonic Flow Meter
Accuracy: ±2% of reading; ±5% below minimum transition rate
Fluid Temperature: 0 to 50°C (32 to 122°F) For an integral model. 0 to 90°C (32 to 190°F) For remote model.
Maximum Pressure: 230 PSIG
Enclosure: IP68 Electronic Housing: Aluminum alloy with plastic cover
Display: 7-segment, 8-digit, single-line LCD
Current Output: 4 to 20 mA/DC current (requires 8 to 24 Vdc supply)
Open Collector Output: 5 to 30 Vdc, 1 mA maximum
Flange: ANSI 150# or DIN
Meter Body: Cast iron
Power Supply: Internal 3.6V battery (included), 6 to 8-year life

More Information: Brochure omega FDT500

Another Article: