Feature
- CUBEGM-X? Series (Buffer tank specification) is an all-in-one unit that has a Touch panel, PLC unit, Mass Flow Controller, Power supply, Valve, Check Valve Gas Mixer and Buffer tank.
- Program operation: Program operation is possible by setting the flow rate and time of each line.
- Alarm function: Alarm sound is notified if an error occurs by any upper / lower limit setting of each line flow rate.
- The pressure in the buffer tank is constantly monitored, and when the pressure falls below a fixed pressure, gas is automatically supplied to the buffer tank at the set mixing ratio. (Automatic stop and automatic restart pressure are fixed values, so please inquire in advance.)
- Simply connect the piping to the INside and OUTside.
- Easy to move due to stoppered casters.
- [CUBEGM-X? Series] is a device that supplies a mixed gas species of 2, 3, 4 to set up and control to any of the flow rates.
- Analog mass flow controller [1000 Series] is mounted as a standard feature.
- The mass flow controller, which flow control range is from 10SCCM to 50SLM, can be mounted as a standard. In other cases, please contact us.
- It can be reduced the cost when you use a Gas mixer than you purchase gas cylinders that have been prepared in the mixing ratio.
- It can be used for a wide range of applications such as analysis, environment, bio, packaging, medical, gas welding.
- Applicable gases: Inert gas. (For more information, please contact us)
Specification
| Model | CUBEGM-X Series |
| Size | CUBEGM-X?2 : W350×D400×H1100(mm)??Except protrusion / In the case of 10 L tank |
| CUBEGM-X?3 : W430×D400×H1100(mm)??Except protrusion / In the case of 10 L tank | |
| CUBEGM-X?4 : W510×D400×H1100(mm)??Except protrusion / In the case of 10 L tank | |
| Input power | AC100-240V |
| Current consumption | About 125VA ?In the case of 3 mass flow controllers equipped with |
| Flow range (*1) | ?50SLM?Total flow rate? |
| Flow rate control range | 1 LINE: F.S.10SCCM?20SLM |
| Flow rate control | MFC : C1000 Series or FCST1000L Series |
| Flow rate output signals | 0-5VDC |
| Operating differential pressure | Conform to built-in mass flow controller specification |
| Pressure Resistance | Conform to built-in mass flow controller specification |
| INLET, OUTLET Valve | Solenoid Valve |
| Leak Integrity | ?5×10-7Pa?m3/sec He |
| Pressure resistance | 0.5MPa |
| Wetted surface material | SUS316, PTFE, Fluoro-Rubber |
| (FCST1000L Series: Magnetic stainless steel, Fluoro-Rubber or Chloroprene rubber) | |
| Standard fitting | 1/4in.SWL (equivalent) ?For other fittings, please contact us. |
| Operating environment | 5-50?, 30-80?RH (Scope of accuracy guarantee: 15-35?) |
| Tank volume(*2) | Touch panel operation |
| Tank operating pressure | 0.49 MPa |
| Mass flow control | Touch panel operation |
| Accessory | AC cable(2m), User’s manual, Written guarantee |
*1. At FCON, flow rates (SCCM, SLM) are converted to values at 0°C, 101.3kPa abs (1atm) for calibration.
*2. Other tank volumes please kindly discuss with us.
Reference: http://www.fcon-inc.jp
