Hengstler RAS Safety Relays

Hengstler RAS Safety Relays

Hengstler RAS Safety Relays is a product from Hengstler. This product comes from safety relays categories. Consequently linked to the demands of our customers.

For decades, HENGSTLER has been intensively involved in matters relating to forcibly guided, or captive, contacts and, as a result, with safety relays. Our large, international customer base benefits from this experienced gathered over many years when it comes to developing and manufacturing relays with forcibly guided contacts.

To ensure that our relays as used in your applications carry on doing their job reliably for years, the quality of products bearing the HENGSTLER name is the highest priority. All our locations are certified to ISO 9001 and ISO 14001, and the entire product range is, as you would expect, in conformity with RoHS and REACH regulations.

Hengstler RAS Safety Relays Features

  • 5 contacts
  • 6 A switching & permanent current
  • Drive is monostable as DC
  • Ambient temperature -25 to +75 °C
  • With forcibly guided contacts to EN 50205, application type A
  • Meets requirements for signal relays under UIC 736e
  • cULus and TÜV approval

Another Article:

Specification

Function / Application Safety relay
Product line KACO
Relay family RAS
Contact set forcibly guided
According to EN 50205 Application type A
Ambient temperature [°C] -25 … +70 °C
Soldering heat resistance [°C] 260 °C
Max. soldering time [s] 5 s
Pins pre-soldered with Sn 100
Approval TÜV
cULus
Standards EN 50205
IEC 61810-1
UL 508
Meets the requirements RoHS
Number of NO contacts 2 … 3
Number of NC contacts 1 … 2
Number of CO contacts 0
Dimensions L x W x H [mm] 36,0 x 12,5 x 29,0 mm
Housing dustproof (RT II)
washtight (RT III)
Shock resistance NO / NC [g] 10/10 g
Pulse duration (half sinus) 16 ms
Vibration resistance NO / NC [g] 5/5 g
Frequency range [Hz] 10 – 55 Hz
Operating time NC contact, the contact opens [ms] 6 ms
Operating time NO contact, the contact closes [ms] 12 ms
Releasing time NO contact, the contact opens [ms] 4 ms
Releasing time NC contact, the contact closes [ms] 6 ms
Mechanical service life (without load) 10,000,000 switching cycles
Connection type Solder pins for pcb
Weight [g] 25 g
Drive system DC monostable
Nominal coil voltage [V] 5 … 110 V
Coil resistance [Ohm] 45 … 15,440 Ohm
Contact material AgSnO + 0,2 µm Au
AgSnO + 2 µm Au
Max. switching current [A] 6:00 AM
Max. switching voltage [V] 230/240 V
Max. switching capacity [VA] 1500 VA
Switching capacity AC-15 at 230 V [Ie in A] 4 A NO contact
1,2 A NC contact
Switching capacity DC-13 at 24 V [Ie in A] 2 A NO
1,2 A NC
Electrical service life (with nominal load) 100,000 cycles
Short-circuit capacity 1000 A / AC 230 V [A] 6:00 AM
Insulation Basic insulation

Download Data Sheet: Safety Relays Type RAS

Ref: hengstler.de

Share